What did you do to your GMT today?

Status
Not open for further replies.
Jtyler77 said:
I changed the oil in the diffs and fluid in the transfer case (no metal shavings:dance:). Also changed the spark plugs with delco's and found a little oil down in the valley's on two of them. Not on the firing pin but on the threads of the plugs. Not freaking out about it, but guessing I'm gonna have to handle it sooner or later.

I wouldn't bother. Common to happen on DOHC inline engines. That tiny bit of oil over 100k miles is nothing to worry about.
 
Sparky said:
I wouldn't bother. Common to happen on DOHC inline engines. That tiny bit of oil over 100k miles is nothing to worry about.


Yeah I'm not too worried about it. I will monitor it for a while here an there and maybe in the future torque the valve cover considering theirs not much torque on them bolts, and I found other loose ones. She only has 62k.

I'm still trying to diagnose some noises I started a thread about. Hopefully I can get her all figured out by next weekend.

I've read some of your post and hope to hell I can get up to those kinda miles.

Thanks Sparky
 

Attachments

  • 2013-08-28 12.14.01.jpg
    2013-08-28 12.14.01.jpg
    86.4 KB · Views: 21
  • 2013-09-03 17.33.57.jpg
    2013-09-03 17.33.57.jpg
    84.1 KB · Views: 21
Got one overflowing tank of gas. The pump shutoff didn't work at the station so I had gas all over the place :hissyfit:
 
hauler001_zps5f2944e2.jpg


Finally I had time to fix the cruise control on my pickup. Banged on a new module (ok, it was used) and she's good to go.:wootwoot:
 
ordered a matching 5th wheel
 
took her for a long drive and tried out the HD on my camera turned out pretty good I found this awesome road outside of the city about 50minutes and I was ready to give it the gas... Convertible miata with euro tails with some old guy just cruising so my video was ruined and super boring.
[video=youtube;WewflkHuz94]http://www.youtube.com/watch?v=WewflkHuz94[/video]
 
STLtrailbSS said:
took her for a long drive and tried out the HD on my camera turned out pretty good I found this awesome road outside of the city about 50minutes and I was ready to give it the gas... Convertible miata with euro tails with some old guy just cruising so my video was ruined and super boring.
[video=youtube;WewflkHuz94]http://www.youtube.com/watch?v=WewflkHuz94[/video]

I hope that wasnt something falling off your SS near the end :rotfl: but playing music in the background will watching your vid made it more enjoyable than it shouldof been :raspberry:
 
Those are my wheel chocks I had in the back, I had the radio off because the whole point was to push it and I was getting ready and crest that hill and boom a damn miata, aka the devil himself
 
STLtrailbSS said:
Those are my wheel chocks I had in the back, I had the radio off because the whole point was to push it and I was getting ready and crest that hill and boom a damn miata, aka the devil himself

Hahaha would of loved to watched that happen :thumbsup:
But what i meant was i was playing music while watching your vid and it made it less "boring" lol
 
STLtrailbSS said:
Those are my wheel chocks I had in the back, I had the radio off because the whole point was to push it and I was getting ready and crest that hill and boom a damn miata, aka the devil himself

Fawking cockblocking miata lol
 
Just got done installing my new lowering spring/shock combo I ordered from tony.
A lot better than running deflated bags.
 

Attachments

  • uploadfromtaptalk1378298740525.jpg
    uploadfromtaptalk1378298740525.jpg
    74.4 KB · Views: 26
22s next? Mr.Moneybags over there getting that modded much faster then the old voy.
 
Buy those new headers I'm waiting to see how they are because I can still return my pacesetters and get those instead look much nicer.
 
STLtrailbSS said:
Buy those new headers I'm waiting to see how they are because I can still return my pacesetters and get those instead look much nicer.

Go ahead. . Ill wait for you. Lol
 
Refreshed the K&N

and.....
TBSSowners got me again

OEM LS2 Heads ordered will probably get these ported and cleaned up and have all the springs installed and ready to go to make my cam install go as smooth as possible.

Also locked in a LS1 efan setup.
 
STLtrailbSS said:
Refreshed the K&N

and.....
TBSSowners got me again

OEM LS2 Heads ordered will probably get these ported and cleaned up and have all the springs installed and ready to go to make my cam install go as smooth as possible.

Also locked in a LS1 efan setup.

Geesh money bags
 
It's your fault your like hey look at all this awesome sh*t I had to get in on it. Hahah
 
Installed my pc'd black door sills and polished SS bowtie made by kevin that I recieved in the mail today. Also took some pics after a carwash. Also recieved my new licence plate.
 

Attachments

  • uploadfromtaptalk1378410709533.jpg
    uploadfromtaptalk1378410709533.jpg
    73.7 KB · Views: 38
  • uploadfromtaptalk1378410722133.jpg
    uploadfromtaptalk1378410722133.jpg
    50.8 KB · Views: 38
  • uploadfromtaptalk1378410770918.jpg
    uploadfromtaptalk1378410770918.jpg
    67 KB · Views: 39
  • uploadfromtaptalk1378410800519.jpg
    uploadfromtaptalk1378410800519.jpg
    68.7 KB · Views: 38
  • uploadfromtaptalk1378410825548.jpg
    uploadfromtaptalk1378410825548.jpg
    96.9 KB · Views: 37
STLtrailbSS said:
Refreshed the K&N

and.....
TBSSowners got me again

OEM LS2 Heads ordered will probably get these ported and cleaned up and have all the springs installed and ready to go to make my cam install go as smooth as possible.

Also locked in a LS1 efan setup.

HELL YES :wootwoot::yes::thumbsup:
 
did spark plugs today. i didnt go with the AC Delco. i went a cheaper route and got autolite platinum. ive heard other members say theyve had no problems. I also took my rear diff cover off to exchange fluid but i found that the gasket was completely shot. waiting for a new gasket ($35.99) to get the envoy rolling again.
 
I've finally started that upward path.
 
Traded in my tb for this bad boy
 

Attachments

  • 00J0J_gTgpT7mIAXn_600x450.jpg
    00J0J_gTgpT7mIAXn_600x450.jpg
    24 KB · Views: 85
  • f01b0f04-30cf-4220-a8fc-cad7e84d47ce.jpg
    f01b0f04-30cf-4220-a8fc-cad7e84d47ce.jpg
    92.9 KB · Views: 30
Here I dug up pic for you....(cant edit my post with a pic..for those of u wondering)
 

Attachments

  • uploadfromtaptalk1378477606623.jpg
    uploadfromtaptalk1378477606623.jpg
    44.2 KB · Views: 22
Here's how my FRI morning is going. Trouble shooting a wiring issue

u5e7apeq.jpg
 
jrSS said:
Here I dug up pic for you....(cant edit my post with a pic..for those of u wondering)

Yeah looks nice, thinking metallic light blue would look good on my metallic blue.
 
Went to oreillys and bought 2 quarts of royal purple 75 90 synthetic gear oil for the rear axle and some castrol for the front axle. Then went to the dealership to buy auto trac 2 fluid. U know what i am doing after working this weekend.
 
Bought 12 litres (3 jugs) of mobil1 synthetic because it was on sale for $24 a jug normally $44

Dont know if i wanna change my voys oil (3000kms since last change)
Or see if i can make a deal with the dealer for the saab 9-7x and change the oil for that

(Little update: i'm gunna go look at a 5.3 9-7x sometime this weekend or early next week. The dealer wants $9000 but needs a little TLC (few scratches and the emblems came off) and the flip out cup holder is broken. Im gunna try and use a 4.2 saab i found for $7500 from another dealer as a barganing tool because its silver and has 20,000kms less and better condition but a 4.2 instead of the 5.3)
Pretty much same hp in a more fuel efficient engine is what im gunna tell them lol
 
I found more stuff on tbss to buy. I got a set of ls2 rocker arms and this will be the only stock part in my heads but I'm still changing them to a comp cam trunnion bearing system. No unkept bearings means no little bits flying through the valves upon failure.
 
Ryda55555 said:
Bout 12 litres (3 jugs) of mobil1 synthetic because it was on sale for $24 a jug normally $44

Dont know if i wanna change my voys oil (3000kms since last change)
Or see if i can make a deal with the dealer for the saab 9-7x and change the oil for that

(Little update: i'm gunna go look at a 5.3 9-7x sometime this weekend or early next week. The dealer wants $9000 but needs a little TLC (few scratches and the emblems came off) and the flip out cup holder is broken. Im gunna try and use a 4.2 saab i found for $7500 from another dealer as a barganing tool because its silver and has 20,000kms less and better condition but a 4.2 instead of the 5.3)
Pretty much same hp in a more fuel efficient engine is what im gunna tell them lol

Hey the good thing about the 5.3 also is it takes 1 less quart per oil change XD the 4.2 calls for 7, the 5.3 calls for 6. Unless you install a deep C6 pan that is. I normally go to Costco when they have Mobil 1 Synthetic on sale, I get 6 quarts for $28, and grab 2-3 boxes at a time lol. Even with Napa Gold filters (same as WIX) I only spend around $35 per oil change with full synthetic.
 
Ryda55555 said:
Bout 12 litres (3 jugs) of mobil1 synthetic because it was on sale for $24 a jug normally $44

Dont know if i wanna change my voys oil (3000kms since last change)
Or see if i can make a deal with the dealer for the saab 9-7x and change the oil for that

(Little update: i'm gunna go look at a 5.3 9-7x sometime this weekend or early next week. The dealer wants $9000 but needs a little TLC (few scratches and the emblems came off) and the flip out cup holder is broken. Im gunna try and use a 4.2 saab i found for $7500 from another dealer as a barganing tool because its silver and has 20,000kms less and better condition but a 4.2 instead of the 5.3)
Pretty much same hp in a more fuel efficient engine is what im gunna tell them lol

Wow we just bought 3 5 quart jugs for 25 a piece. Normal price at Walmart. Just another thing that is expensive in Canada eh?
 
jrSS said:
Went to oreillys and bought 2 quarts of royal purple 75 90 synthetic gear oil for the rear axle and some castrol for the front axle. Then went to the dealership to buy auto trac 2 fluid. U know what i am doing after working this weekend.

Why the two different types of oil?

Ryda55555 said:
Bout 12 litres (3 jugs) of mobil1 synthetic because it was on sale for $24 a jug normally $44

Dont know if i wanna change my voys oil (3000kms since last change)
Or see if i can make a deal with the dealer for the saab 9-7x and change the oil for that

(Little update: i'm gunna go look at a 5.3 9-7x sometime this weekend or early next week. The dealer wants $9000 but needs a little TLC (few scratches and the emblems came off) and the flip out cup holder is broken. Im gunna try and use a 4.2 saab i found for $7500 from another dealer as a barganing tool because its silver and has 20,000kms less and better condition but a 4.2 instead of the 5.3)
Pretty much same hp in a more fuel efficient engine is what im gunna tell them lol

Only 3000k? That oil has barely been in there yet and plenty of life left. No point.
 
I reinstalled my front inner fender liners. Took some cutting to match up with the cutting I did on the sheet metal, just used zip ties and the plastic rivets that were still good.

Speaking of which, does any one know where to get the foam pieces that go behind the inner liner. My driver side one disappeared, junkyards only TB was pretty screwed on the driver side.
 
Status
Not open for further replies.

Forum Statistics

Threads
24,056
Posts
646,291
Members
20,230
Latest member
kville44

Members Online