What did you do to your GMT today?

Sparky · May 24, 2012

Denali n DOO said:
Well there ya go, I did take it out of the garage to go get the windshield changed. Kinda hot today so I look at the outside temp to see just how hot and it says 16its more list 26-27. So being as I took it out, just like I said something else will go wrong and it didguess I jinxed myself.

I seem to recall this being a simple fix of cleaning the sensor or the connector the sensor plugs in to... I don't remember exactly as I don't have that feature on mine, but I remember reading about it.

mapanch · May 24, 2012

Washed, waxed and buffed. Did my dad's Tundra and my mom's S-80 also. 6 1/2 hours I hurt everywhere. LOL. Did my sisters Neon and the tractor on Tuesday. Just the boss' Aveo left to do now.

Voymom · May 24, 2012

I did a jig in front of mine :redface:

SBUBandit · May 24, 2012

Voymom said:
I did a jig in front of mine

Any reason? Did Phantom throw a dollar at you?

CdnGMan · May 24, 2012

Voymom said:
I did a jig in front of mine

Where's the vid?? :wink:

Voymom · May 24, 2012

SBUBandit said:
Any reason? Did Phantom throw a dollar at you?

See my thread "I could do a jig"

Video is there too.

I told everyone if my gas mileage once calculated was over 14 MPG's I would do a video of me doing a jig...

My gas mileage after calculating it was 15.22 MPG's city lol

No, he didn't throw a dollar at me, but then again I wouldn't be that cheap, especially after all the money I put into that damn thing in 4 months :biggrin:

TexazReece · May 24, 2012

just removed my Indiana Pacers car flags :sadcry:

blazinlow89 · May 24, 2012

Loaded up the truck for the move, have it packed to the roof. Also bought a hitch mounted cargo rack from a friend at work, pretty nice I got the Rola water proof bag, a pro series 60" x 24" 500# rack. Now I need to get a folding adapter so I can flip it up when its not loaded.

Mark20 · May 25, 2012

With the LEDs dieing on the license plate bulbs I replaced them with the originals which I saved. Of course one decided to burn out. So back out there with a screwdriver to put a new one in. Need to order new LEDs.

smitty5150 · May 25, 2012

Replaced my radiator and core support, and added e fans from a Chrysler Concord. The fans install is much easier when the clutch isn't electronically controlled. Took me a few hours and less than $100. Now the truck is quieter and more smooth running than the tb was.

tokahao · May 25, 2012

Washed and waxed. Parts came just in time to be a weekend project!

View attachment 21047

Bilstein HDs
View attachment 21046

BrakeMotives. Before...
View attachment 21044

... After
View attachment 21045

:smile:

smitty5150 · May 25, 2012

Nice! You're gonna love those brakes.

Matt · May 25, 2012

Going outside to give it a tub right now...then driving to the cabin in PA for the night.

SBUBandit · May 25, 2012

tokahao said:
... After
View attachment 7070

The brakes look good. Just be sure you do the recommended burn-in procedure. And try not to get sick in the process. The burn-in process made me dizzy as hell

Sparky · May 25, 2012

SBUBandit said:
The brakes look good. Just be sure you do the recommended burn-in procedure. And try not to get sick in the process. The burn-in process made me dizzy as hell

The directions say moderate 50-10mph stops, but not spinning in circles when doing so :raspberry:

dave_stumph · May 25, 2012

Changed front stabilizer end links, oil change and motor mounts. Damm what a smooth ride!! Although the motor mounts were a pain to get out....stupid fan shroud.

SBUBandit · May 25, 2012

Sparky said:
The directions say moderate 50-10mph stops, but not spinning in circles when doing so

My problem was the repeated accelerate/stop cycle while also keeping an eye on the speedometer. :crazy:

The process does work though, Truck stops great

guiltyimnot · May 25, 2012

Ok..I can finally post this because I ended up having to redo it after sears ruined it putting new rubber on. I plasti dipped the stock wheels as well as the large dash panel. Want to do more trim and dash pieces next but not sure how to get a few off. Definitely need to clean it but with 3 kids not always easy. View attachment 21058

07ChevyTruck · May 25, 2012

Let's see new battery arrived. Picked up new hose this morning. Awaiting word on upgraded battery terminal ends.

Other repair parts in inventory.

Now I need the weather to be good enough to install all new parts. :thumbsup:

ConeKilrAutoX · May 25, 2012

guiltyimnot said:
Ok..I can finally post this because I ended up having to redo it after sears ruined it putting new rubber on. I plasti dipped the stock wheels as well as the large dash panel. Want to do more trim and dash pieces next but not sure how to get a few off. Definitely need to clean it but with 3 kids not always easy.

Looks great!

million-miles · May 25, 2012

Cleaned the family van on tues and the trailblazer today. Now ready for road trip to the beach on sun. View attachment 21061

million-miles · May 25, 2012

Got it with the sun out.
View attachment 21062

07ChevyTruck · May 25, 2012

million-miles said:
Got it with the sun out.
View attachment 7088

Nice and clean. :biggrin:

Voymom · May 25, 2012

Got sick and tired of my memory seats only working when they wanted to. So we took a peek at the DDM and found that the wires and connector which goes from the memory seat module to the DDM was loose, and that a possible plastic lip inside the door handle was rubbing the connector and wires causing it to come out of the DDM slightly. So I decided to use electrical tape to tape everything down and tried to make it more stable. Now it's a waiting game to see if it will continue working. It works great right now, but the long run will be a different story.

smitty5150 · May 25, 2012

Pics of the Efan setup.

no more stupid clutch!

And my aligned front end...finally.

MDBT · May 25, 2012

Picked it up from the dealership with a fixed window, new fluids in the diffs and the t-case, and a couple of new serpentine belts.

Replacement interior parts on their way, probably a project for me to do next weekend.

jrSS · May 25, 2012

Washed it...and thinking of trading it in for an SS. Gonna go look at it tomorrow. SAWEEEET.

Boricua SS · May 25, 2012

silvernclean said:
Washed it...and thinking of trading it in for an SS. Gonna go look at it tomorrow. SAWEEEET.

oh snaps son!!! get some!!!

HARDTRAILZ · May 25, 2012

Good luck

Wishbone · May 25, 2012

silvernclean said:
Washed it...and thinking of trading it in for an SS. Gonna go look at it tomorrow. SAWEEEET.

Awww, now I could get jealous... :smile:

TexazReece · May 25, 2012

Yo silver post some pics of it bro :thumbsup:

jrSS · May 25, 2012

Oh I def will. If I do get it....well its black and I guess I'll still be silvernclean. Haha.

TexazReece · May 25, 2012

Or BlacknCleanSS :biggrin:

jrSS · May 25, 2012

Don't think u can change ur profile name..??

Here's a good pic of the SS

Voymom · May 25, 2012

silvernclean said:
Washed it...and thinking of trading it in for an SS. Gonna go look at it tomorrow. SAWEEEET.

Good luck!!! I'm already jealous btw lol If I didn't have so many kids to cart around on a daily basis....I would have gotten an SS to begin with.

Excited to see what tomorrow brings for you :thumbsup:

Edit: Pic doesn't work for me....

jrSS · May 25, 2012

Yea I seen that. Damn it!!

Boricua SS · May 25, 2012

pic still no worky!!! :hissyfit:

barron03 · May 25, 2012

View attachment 21069
Changed the left side wheel hub after 185 k :thumbsup:

Boricua SS · May 25, 2012

dang... 185k on a wheel bearing... mine didnt even last 32k miles :rotfl:

Regulator · May 25, 2012

Boricua SS said:
dang... 185k on a wheel bearing... mine didnt even last 32k miles

Mine tend not to last more then 6 months!

What did you do to your GMT today?

Attachments

Attachments

Attachments

Attachments

Attachments

Forum Statistics

Share This Page