What did you do to your GMT today?

Status
Not open for further replies.
Fire06 said:
Good luck Blazin I just did all that and the bushings in the control arms also.
Click to expand...
Where's the write-ups, pics, and vids?
 
02TrailBlazer said:
Back to stock at the moment, it is really faint at stock config. only enough to dimly light the front 194's. I originally noticed it when I put in my modded taillight boards with led bulbs which lit up like I had my hazards on whenever I went to turn lol, so I took those out and went back to stock for the troubleshooting which hasn't ended yet.
AFAIK, it has to be a bad ground for the turn signals OR bulbs/sockets that are messed up.
I'd rather fix the source of the bleed but if it comes down to it I'll just add diodes.
On a side note, if I determine that it's turn signal grounds it should be a cleaning of G401 and G402. That or I make a new ground straight to the battery.
Click to expand...
I'm showing G107 and G103 for mine, maybe I'll get under there and check mine as well for good measure, since I'm really hoping this isn't a wiring issue that I'll have to track down. I only added the diodes on mine because I didn't build the switchback circuit myself, so I didn't know what all of the connections were, and the LED bulbs I was using before didn't have this problem. My diodes were downstream of the 3157 sockets.
 
  • Like
Reactions: 02TrailBlazer
Blckshdw said:
I'm showing G107 and G103 for mine, maybe I'll get under there and check mine as well for good measure, since I'm really hoping this isn't a wiring issue that I'll have to track down. I only added the diodes on mine because I didn't build the switchback circuit myself, so I didn't know what all of the connections were, and the LED bulbs I was using before didn't have this problem. My diodes were downstream of the 3157 sockets.
Click to expand...
Those are just what I came up with from some searches, I think it was on the "other" site. Best of luck!
 
smt 59 said:
Rear lift completed today for a 2.5 inch lift all round thanks to some tweeking at the spring shop then off to get the alignment done. So the complete suspension system and lift done with Bilstein and suspension maxx.
Click to expand...
:pictures:
 
  • Like
Reactions: Aarkon and smt 59
ImageUploadedByTapatalk1400117664.010683.jpg
Got that ext rear heat hose thing that connects to the intake manifold. I think gmpartsdirect went a little over board with the box
 
Got my EXT shortie serp belt today.
 
kjkim93 said:
There's a shorty version for us?
Click to expand...
Yeah, two different sized belts for the I6. The EXTs have a shorter serp belt (90 7/8") then the SWB's.(92 1/8"). These measurements are for the ACD belts, I think when I looked at rockauto the goodyears were slightly different.
 
MAY03LT said:
Yeah, two different sized belts for the I6. The EXTs have a shorter serp belt (90 7/8") then the SWB's.(92 1/8"). These measurements are for the ACD belts, I think when I looked at rockauto the goodyears were slightly different.
Click to expand...
ImageUploadedByTapatalk1400120045.450640.jpg
Oh god. Hopefully they gave me the right one. According to my vin
 
kjkim93 said:
Oh god. Hopefully they gave me the right one. According to my vin
Click to expand...
If their 2290mm measurement is correct, it will work. :cool:
 
sawicksted said:
Quad beam MOD :woot:

Got some MUD on the truck.... see - just like the sign says!!!
Click to expand...
That plate looks familiar lol


uploadfromtaptalk1400172953048.jpg
 
  • Like
Reactions: dmanns67 and sawicksted
Darkrider_LS said:
That plate looks familiar lol


attachicon.gif
uploadfromtaptalk1400172953048.jpg
Click to expand...
Sk. Canada!!! Good old Canadian tire - gotta love it. The interesting thing is that we have red mud here and the plate I got has "reddish" mud splashes on it where as your has the "greyish" mud splashes.
Pretty cool!
 
Loaded it for a 3 day roadtrip
 
kjkim93 said:
Wow that's some pretty quick shipping.
Click to expand...
What's in the box? :undecided:
 
Nice!
 
  • Like
Reactions: jrSS
Ordered some smoke vinyl film for the tail lights, 3rd brake light, and rear reflectors. Picked up some new bowtie vinyls from Motor City Vinyl for the new center caps I just ordered to replace the ones on the SS wheels. I called every dealership locally and none of them had the center caps in stock. They also wanted any where from $20 to $28 each for the center caps. GM parts direct had them for $11 each.
 
  • Like
Reactions: TexazReece and jrSS
Parked it outside the garage for the first time last night...more in the FU thread.
 
  • Like
Reactions: Robbabob
Drove it to work.
 
IMG_20140516_180844_333.jpg

IMG_20140516_180811_173.jpg

Got the new alt today. I was thinking about some things and I realized that the batts that I have now are getting close to 5 years old so guess it's time to replace them as well.
 
  • Like
Reactions: dmanns67 and Blckshdw
Status
Not open for further replies.

Forum Statistics

Threads
24,046
Posts
646,215
Members
20,208
Latest member
priscillaH

Members Online

No members online now.
Total: 720 (members: 0, guests: 720)

Share This Page

Share This Page
Top Bottom
Back