What did you do to your GMT today?

DDonnie · May 15, 2013

Phantom said:
Took the pin stripe off the truck. PITA it was. Then gave it a bath.

Before
View attachment 14566

After
View attachment 14567

Looks nice man! You know you you need next? White LED's :thumbsup:

Ryda55555 · May 15, 2013

I was just doing some grocery shopping for my mom to make dinner and this guy waved me down and told me he had a voy SLT in black also and asked how much it cost to re-paint my car hahaha i just told him i just finished waxing and its the original paint.. I showed him the turtle wax blackbox set and then he continued to browse the voy, complimenting on the LEDs and side mouldings and on and on. Felt really good to get a compliment from someone who has the same truck in real life :tongue:

i told him i did everything pretty much myself
THE MOST IMPORTANT PART...... I TOLD HIM ABOUT OUR SITE!!!! And told him how everything he'll ever want or need to know is on here, so hopefully we'll be getting a new member soon :biggrin:

This is what he saw lol

Btw DnD, i was looking for a pic of my truck without the envoy emblem on the rear and couldnt find a decent one so i'll take another one when i get a chance :thumbsup:

jimmyjam · May 15, 2013

Voymom said:
Now I have to figure out where and why I hear metal clunking/banging/swinging/making noise on the rear drivers side when I go down a hill or hit a bump. It isn't the same noise that the end links make, so I doubt it's that. Just gotta find time to jack up the ass end and crawl under it. Hopefully I can take a peek before it rains.

David's truck was doing the same thing, it as the lower panhard bar bolt. which happens to be on the rear driver side. tightened it up and the noise went away.

Voymom · May 15, 2013

jimmyjam said:
David's truck was doing the same thing, it as the lower panhard bar bolt. which happens to be on the rear driver side. tightened it up and the noise went away.

Thanks Jimmy! I will give that a look. I tried to recreate the noise, but we all know how that goes lol

Boricua SS · May 15, 2013

mapanch said:
Wheres he been lately? Haven't heard/seen (?) much outa him lately

well you noticed I said he "was" an auto body collision tech... he finally got the call for his air traffic controller position, so he moved to Oklahoma for 3 months for his training, then came back to Ohio and now works at his designated ATC center.. he also has a daughter now... so combine the career move and having a family now, he just doesn't browse the forums like he used to...

Sparky · May 15, 2013

jimmyjam said:
David's truck was doing the same thing, it as the lower panhard bar bolt. which happens to be on the rear driver side. tightened it up and the noise went away.

I'll have to check mine. I've been having a thunk at times that has been eluding me.

kjkim93 · May 15, 2013

Ryda55555 said:
My truck is making the same noise on the same side in the rear also.... Its really annoying and i've been looking forever to find out what it is.
I already changed the sway bar links and they're super tight still so its not that either
I would appreciate it if when you find out you let me know and i'll do the same if i figure it out teamwork!!

Same here! have a clunking sound in the front! I have no clue what it is.

Boricua SS · May 15, 2013

here is what I did today... got this idea from ghenny440 (my best friend) and he gave me the led's.... so I put them to use... ricer? maybe... do I care? hell no :rotfl:

Blckshdw · May 15, 2013

Boricua SS said:
..... ricer? maybe... do I care? hell no

I'll be right there with you in a week, when my strips come in, brutha!!! :thumbsup:

Boricua SS · May 15, 2013

Blckshdw said:
I'll be right there with you in a week, when my strips come in, brutha!!!

that damn Glen and feeding our mod bugs :rotfl:

Ryda55555 · May 16, 2013

ConeKilrAutoX said:
tried again to get it running without the turbo still and no luck. there are times I think twice about having attempted this turbo build
(now is one of those times...) just gotta keep working on it

When there's a will, theres a way

And when you're done and the turbo is in you can tell all the other non turbo'd GMTs

ConeKilrAutoX · May 16, 2013

Ryda55555 said:
When there's a will, theres a way

And when you're done and the turbo is in you can tell all the other non turbo'd GMTs

hahaha that made my night :rotfl:

thanks man :thumbsup:

AV8ER · May 16, 2013

Blckshdw said:
I'll be right there with you in a week, when my strips come in, brutha!!!

As much as I like this I may not be far behind either!

NinjuhhNutz · May 16, 2013

AV8ER said:
As much as I like this I may not be far behind either!

aaaaaaaaannnnnnnnnnnnddddddddddd I'm bringing up the rear...lol will be in on this, in some sorts, here soon :yes:

CdnGMan · May 16, 2013

NinjuhhNutz said:
aaaaaaaaannnnnnnnnnnnddddddddddd I'm bringing up the rear...lol will be in on this, in some sorts, here soon

Oh hell no... y'all ain't leaving me behind!!! :raspberry:

NinjuhhNutz · May 16, 2013

...there goes the neighborhood XD

DDonnie · May 16, 2013

NinjuhhNutz said:
...there goes the neighborhood XD

Y'all convinced me, ordering mines tomorrow

Ryda55555 · May 16, 2013

Next thing you know, GM has the option for LED vent lights in their new vehicles :rotfl:

NinjuhhNutz · May 16, 2013

Ryda55555 said:
Next thing you know, GM has the option for LED vent lights in their new vehicles

Hey, crazier things HAVE happened! :eek:

Short Bus · May 16, 2013

CdnGMan said:
Oh hell no... y'all ain't leaving me behind!!!

I might jump on this bandwagon, or is it a Short Bus :biggrin:

?

Darkrider_LS · May 16, 2013

Blckshdw said:
I'll be right there with you in a week, when my strips come in, brutha!!!

Ya know seeing all these led mods im getting more and more tempted to do some led mods!

On a side note...I may seriously look at plastidipping the grill sometime in the 11 days im off

DDonnie · May 16, 2013

Ordered this Hitlights Red Flexible Ribbon LED Strip Light, 300 LEDs, 5 Meters (16.4 Feet) Spool, 12VDC Input (Adapter not included) - Amazon.com

(everyone's doing it!)

Ryda55555 · May 16, 2013

This is for Denali n Doooooooooooo!
Took these just for you :wink:

.....

CdnGMan · May 16, 2013

Ryda55555 said:
This is for Denali n Doooooooooooo!
Took these just for you

.....

The NF River Run is gonna be a blast with all these shiny trucks... :thumbsup:

I may just have to take the side roads out so that the bugs don't mess up the front of Canyonaro on the way down there tho... :rotfl:

I'm thinking next week will be "detail the heck out of Canyonaro week"... :raspberry:

DDonnie · May 16, 2013

Ryda55555 said:
This is for Denali n Doooooooooooo!
Took these just for you

.....

Dangit, now I've got to wax midnight. :eek:

Sparky · May 16, 2013

You guys are making me feel bad that the most my truck has seen this year is a car wash.

Blckshdw · May 16, 2013

Sparky said:
You guys are making me feel bad that the most my truck has seen this year is a car wash.

Mine hasn't even been washed yet this year. Good thing our rainy season starts soon! :redface:

Denali n DOO · May 16, 2013

Ryda55555 said:
This is for Denali n Doooooooooooo!
Took these just for you

.....

I thought you took the GMC off as well. Sure does look nice n shiny :thumbsup:

Denali n DOO · May 16, 2013

CdnGMan said:
The NF River Run is gonna be a blast with all these shiny trucks...
I may just have to take the side roads out so that the bugs don't mess up the front of Canyonaro on the way down there tho...

I'm thinking next week will be "detail the heck out of Canyonaro week"...

Lol, bring a drying towel too cuz the mist of Niagara Falls always rains on the parkway :raspberry:

HARDTRAILZ · May 16, 2013

Drove it to work. I wish i could afford to commute with it, cause I do love driving it.

Stretched the legs on the interstate for first time in awhile...

Stretching its legs makes it pretty thirsty...

Got the office building on my roof rack. Have to park it in the surface lot cause it won't quite fit in the parking garage these days...

Ryda55555 · May 16, 2013

Denali n DOO said:
I thought you took the GMC off as well. Sure does look nice n shiny

Nope i like the GMC, i painted the red part with plastidip so it looks really cool hahaha
Gnna go up to the cottage this weekend and bring the orbital buffer, this is just a quick hand wax

Darkrider_LS · May 16, 2013

Washed the exterior and detailed the interior. And got two stone chips repaired in the windshield

mrphoenix80 · May 16, 2013

Short Bus said:
I might jump on this bandwagon, or is it a Short Bus ?

Count me in! I have a half a roll of red LEDs left over. :thumbsup:

mikeinDE · May 16, 2013

Boricua SS said:
here is what I did today... got this idea from ghenny440 (my best friend) and he gave me the led's.... so I put them to use... ricer? maybe... do I care? hell no

My Magic 8Ball tells me that next up is-----
The vents on the back of the center console?

Boricua SS · May 16, 2013

mikeinDE said:
My Magic 8Ball tells me that next up is-----
The vents on the back of the center console?

.. chit... I forgot to post that pic... they're already done lol...

mikeinDE · May 16, 2013

Boricua SS said:
.. chit... I forgot to post that pic... they're already done lol...

Nice!

Voymom · May 16, 2013

I was going to try and fix my side view mirror today but.....

View attachment 28199

Short Bus · May 17, 2013

Boricua SS said:
.. chit... I forgot to post that pic... they're already done lol...

WTF, we're waiting :raspberry:

Fire06 · May 17, 2013

Voymom said:
I was going to try and fix my side view mirror today but.....

View attachment 14620

That is good :thumbsup:

Ryda55555 · May 17, 2013

Vht'd the reverse light reflectors and redid the mirror covers first by sanding this time so no texture

What did you do to your GMT today?

Attachments

Attachments

Attachments

Attachments

Attachments

Forum Statistics

Share This Page