What did you do to your GMT today?

Status
Not open for further replies.
Ryda55555 said:
Something bad happened today at the drive-through car wash... Who can spot what happened?

Didnt realize until it was too late now its long gone
Click to expand...

Why are you holding your wiener in public??? :redface:
 
Ryda55555 said:
Something bad happened today at the drive-through car wash... Who can spot what happened?

Didnt realize until it was too late now its long gone
Click to expand...


They stole your Saab and tried to pawn off an Envoy as a replacement........:wootwoot:
 
Sprayed a bunch of bolts with PB blaster and will continue to do so every day all week. Hopefully it will let them come loose without too much trouble. The one really concerns me however :no:
 
Mounted a used tire on my spare wheel and stuck it on the truck
 
HARDTRAILZ said:
Mounted a used tire on my spare wheel and stuck it on the truck
Click to expand...

Something I need to do. I am looking at building a foldable tire rack for the hitch, if my plan is right it can be done for under $50.
 
Ryda55555 said:
Sausage not weiner :raspberry:
Click to expand...

Is there really a difference? Either way it looks like you got your meat in that pic
 
Playsinsnow said:
Is there really a difference? Either way it looks like you got your meat in that pic
Click to expand...

Not sure about you all over in MN, but I do not know many people that hold their meat out in a bun covered in condiments.
 
blazinlow89 said:
Not sure about you all over in MN, but I do not know many people that hold their meat out in a bun covered in condiments.
Click to expand...

Scroll up to post 7756, Ryda does. There are a few other pics of the like here too I am sure of :raspberry:
 
Trying to start a new trend for us guys :rotfl:
For girls theres twerking so i figured your meat in a bun with your favorite condiments would catch on eventually :raspberry:
I call it "street meatin"
 
Ryda55555 said:
Trying to start a new trend for us guys :rotfl:
For girls theres twerking so i figured your meat in a bun with your favorite condiments would catch on eventually :raspberry:
I call it "street meatin"
Click to expand...

Next Hunt: Your GMT with your meat in a bun with your favorite condiments :rotfl:
 
Ryda55555 said:
Trying to start a new trend for us guys :rotfl:
For girls theres twerking so i figured your meat in a bun with your favorite condiments would catch on eventually :raspberry:
I call it "street meatin"
Click to expand...

I like where you are going... mmm I am hungry lol. Maybe it is an up North/Canadian thing. They don't know what they are missing! If it burns and you don't like it, don't put any on! Plus it could be a, look at what photo bombed my street meat shot :undecided:
 
TexazReece said:
Note to self- No condiments that'll burn.

Is it limited to buns or can it be flat bread too :rotfl:
Click to expand...

MEAT. If you are rocking it without anything considered bread go to town. Rye, wheat, chessy whatever fills the tummy :drooling: lol
 
Loool flatbread, brownbread, burntbread, whitebread, freshly toasted bread, even dirty bread if you wanna go there :rotfl:

But i dont think playsinsnow wants my meat... No matter how hungry :raspberry:

All humor aside steak in a bun is amazing lol or if you ever go to a Jamaican patty place you should ask them to put it on a bun (frozen patties work too lol)
 
This is from the weekend but eh....Redid the plasti dip on my grille, Debadged the hatch, added a GMT Nation decal



Uploaded with ImageShack.us



Uploaded with ImageShack.us
 
Bought a new hitch cover and gta v
GOODBYE SOCIAL LIFE!
 

Attachments

  • image.jpg
    image.jpg
    96.7 KB · Views: 25
  • image.jpg
    image.jpg
    94.1 KB · Views: 24
Started prep for the 4x4 jamboree this weekend.
 
HARDTRAILZ said:
Started prep for the 4x4 jamboree this weekend.
Click to expand...

I wish that I had more areas to off road around here, most of what we get are old farm roads and power lines when we can. I really want to go to WindRock park when we go to TN for our wedding on May, but I have been told no. Don't want to break the truck during the week we are down there, I would hate to see the cost of flat bedding it back to MD.
 
Not today, but I changed out both diffs, transfer case and engine oil this past sunday. Will eventually tackle the transmission or have my mechanic do it for it. Also had new tires put on yesterday for the upcoming winter.
 
The recent air pressure thread got me moving to check the Voy's tires. All low.I've got to keep a closer eye on them.
 
Getting ready to take the SS to the dealership. I've got an appointment to get the driver door switch recall and fuel level sender TSB done.

They told me that since the one is a safety recall, I get to have a loaner. :wootwoot:

(hopefully not the one in "The Mask") :ugh:

View attachment 30773
 

Attachments

  • loaner.jpg
    loaner.jpg
    35.3 KB · Views: 19
Ordered upper ball joints
 
jonbo2002 said:
fun fun!!! I'll probably be doing mine once I move, be redoing the while front end when I put the lift on.:thumbsup:
Click to expand...

Uppers are easy. Not looking forward to doing lowers again.
 
Out of all the shit done to my ss....the rear sway bar endlinks were the worst to put on. What a pain in my ass. Had to cut them off. any way that's what I did today.
 
jrSS said:
Out of all the shit done to my ss....the rear sway bar endlinks were the worst to put on. What a pain in my ass. Had to cut them off. any way that's what I did today.
Click to expand...

I just cut my links and unbolted my swaybar and threw it out:biggrin: much easier:thumbsup:
 
jonbo2002 said:
I just cut my links and unbolted my swaybar and threw it out:biggrin: much easier:thumbsup:
Click to expand...

The install of my new ones was easy...it was getting the oem ones off that was a pain.
 
My new endlinks arrived today. I thought they had a hex for tightening down but no, they are like OEM with the allen wrench hole in the end. Darn, I hate that design. Oh well.

My new front UCAs also came, so fairly soon I should have the loud rattling and groaning fixed. Mostly. The LCAs are still original and creak a little bit sometimes but they're not too bad.
 
DJones said:
I drove mine 3 miles.

I got P0305 in return.
Click to expand...

Its just pissed you did not drive it further. Drive it another 15 or 20 miles wide open and burn that shit out...then it will be happy:raspberry:
 
Towed the Saab to a shop to have a broken bolt removed. Tried to remove it myself but no such luck.
null_zps63879b25.jpg
 
Sparky said:
My new endlinks arrived today. I thought they had a hex for tightening down but no, they are like OEM with the allen wrench hole in the end. Darn, I hate that design. Oh well.

My new front UCAs also came, so fairly soon I should have the loud rattling and groaning fixed. Mostly. The LCAs are still original and creak a little bit sometimes but they're not too bad.
Click to expand...

My UCA's have made alot of noise since I flipped them, still need to get a new set to get the bushing pressed in. As for endlinks I went with the Dezza ones, the rears had hex nuts, the front had allen keys. But they are a lot beefier than the stock POS ones.
 
fireman4215 said:
Towed the Saab to a shop to have a broken bolt removed. Tried to remove it myself but no such luck.
null_zps63879b25.jpg
Click to expand...

What bolt????
 
Status
Not open for further replies.

Forum Statistics

Threads
24,045
Posts
646,196
Members
20,201
Latest member
omahalost85

Members Online

Total: 663 (members: 2, guests: 661)

Share This Page

Share This Page
Top Bottom
Back