xavierny25
Member
Yay. I'm thinking you amp will be pulling about half that or less. So a smaller rated fuse closer to the amp is necessary. You don't want to chance this. I'm sure you amp has fuses or a over heat protection of some sort.
Yea it does and yea I need to get a different fuse but iirc it has 3 20 amp fuses so I should be goodxavierny25 said:Yay. I'm thinking you amp will be pulling about half that or less. So a smaller rated fuse closer to the amp is necessary. You don't want to chance this. I'm sure you amp has fuses or a over heat protection of some sort.
Looked it up 2 fuses and thermal protection. Your all good. [emoji106]Gerbil21 said:I got 8 gauge with a 60A fuse also, I'm planning to get a ago battery and also get a sun too on a separate line
Yup just need a 40A fuse and I'm donexavierny25 said:Looked it up 2 fuses and thermal protection. Your all good. [emoji106]
How much? I was looking at this, if I can do it all for around the same price that won't be bad I just need to find a good sub and mono amp to go with your box.xavierny25 said:Let me know when you want a stealth box made up. I still have the cast ready to make another one if you interested. Just need to know what sub you would want to put in it. [emoji4]
It's just something I wanted to run by you.20150628_210026.jpg
No link yet but it's on their catalogWhen you get a chance send me the link to the new amp.
That sub channel is a little weak. What subs are you putting in your doors? And if we do your rear sub what are you thinking of putting back there?It's the candy-5
View attachment 70881
That sub channel is a little weak. What subs are you putting in your doors? And if we do your rear sub what are you thinking of putting back there?
Yea that's MO better er.Yea nevermind found this instead
It's cea rated so at least I know it's true ratings
http://www.sonicelectronix.com/item_40253_NVX-JAD900.5.html
its still not super high powered but I may not need it since I still need to get subs and speakers to match aswell
Yea but I think I may just have to go with a 4 channel amp for the speakers and a 1 channel amp for the subYea that's MO better er.
Kicker makes a 600 watt mono block amp that's like 7x8. I have the 300 and it sounds real nice. And it fits under the rear seat in the on star module spot. If you go that route. Small. Just saying.Yea but I think I may just have to go with a 4 channel amp for the speakers and a 1 channel amp for the sub
Well I doubt I'll be doing that soon I need to spend money on the front suspension for now but that is a good priceIf I make your rear stealth sub encloser I'd like you to run this as a sub. This is what I'll be picking up before the weekend for $180. I know the guys at Bensonhurst audio there like 2 blocks away and I throw them alot of work from ppl I know. So there cutting me a deal.
http://www.amazon.com/gp/product/B00161382E/?tag=gmtnation-20
When I do get it you'll be my first stop to have you check it out.
Are those rockfords going in the front or back doors? Pics pleaseGot the Rockford fosgate prime speakers installed and it sounds a good bit better the pyle (of shit) were crackling bad
Also got more insulation for the rear doors just started now
Ok so I got the bushing in and can't wait to install these things are nice and stiff how parts should be not soft worn out crap
View attachment 72435
Also here's a pic with the 5.25 bass blockers installed
View attachment 72436
I'd like to be there when you remove all those bushings and ball joints. It seems like It'll be fun. I haven't done any work on my lower control arms so it would be a watch and learn experience for me. I just ordered the complete arms for my voy but I'll be removing the bushings and ball joints to get the old arms powder coated.
Damn that sucks. I already have my set of new moog lca's ready for me to install this weekend maybe even tomorrow since I have the day off.
I also got a new half shaft assembly for the passenger side as well as the sway bar bushings and bracket to tackle.
Btw what bushings did you get maybe I'll take those of your hands since your purchasing new lca's?