xavierny25
Guru 44 From Staten Island, N.Y
Latest Activity Postings About
-
-
When you're just plain bad at parking, but don't give a damn... :rolleyes: -
xavierny25 reacted to Mooseman's post in the thread What did you do to your GMT today? [Part II] with
Like.
I swear by ACDelco pads and rotors, which are supposedly Raybestos. Another that is very favoured is Adaptive One from Napa. -
xavierny25 reacted to Elizabetty's post in the thread All modules failing randomly or different starting point? with Like.
Thanks. Two of my codes in the original post are somewhere deep on Google as being somehow related to cruise control and HVAC as well. I think I have a vacuum problem which I started a different...
-
xavierny25 reacted to TJBaker57's post in the thread All modules failing randomly or different starting point? with Like.
One common cause of cruise not working is a brake light switch issue. The brake light switch in the truck is in reality 3 switches in the one unit. 2 of the switches are 'ON' when the pedal is NOT...
-
xavierny25 reacted to Elizabetty's post in the thread All modules failing randomly or different starting point? with Like.
Definitely familiar with AC Delco as a brand I would lean to when available for anything really. So until anyone pipes up and starts fighting over which is better, LOL just kidding, I will go with...
-
xavierny25 reacted to Mooseman's post in the thread All modules failing randomly or different starting point? with Like.
That happens when particular codes come up. Even if the money (engine) light isn't on, the code may be pending and disabling cruise. P1440 comes to mind.
-
xavierny25 reacted to Mooseman's post in the thread All modules failing randomly or different starting point? with Like.
Normally, I'd go with ACDelco but it seems to be NLA now. In that case, go with Standard. Dorman for anything electrical is garbage.
-
xavierny25 replied to the thread Guess The Next Poster II.azswiss
-
xavierny25 reacted to TJBaker57's post in the thread All modules failing randomly or different starting point? with Like.
For a learning experiment today while running errands I recorded the data stream at the point I turned the key off until the time when the radio shut off. It was right at ten minutes give or take...
-
xavierny25 reacted to Mooseman's post in the thread What did you do to your GMT today? [Part II] with Like.
I did once a long long long time ago. The manual said that the crush sleeve needs to be repalced. Didn't have a torque wrench to install a new crush sleeve so I marked the pinion to the yoke to...
-
xavierny25 reacted to Blckshdw's post in the thread What did you do to your GMT today? [Part II] with Like.
Got under it for a quick check around the transmission for any wetness that could be leading to the wet diff. No dice, everything was clean and dry, no residue on the driveshaft. Didn't spend...
-
xavierny25 reacted to aaserv's post in the thread What did you do to your GMT today? [Part II] with Like.
Since we're on this never ending topic again I thought Id update my review of the "new" ACDelco clutch fan. Behr the original manufacturer was bought out by Mahle. I have the new ACD fan made...
-
xavierny25 reacted to BrianF's post in the thread What did you do to your GMT today? [Part II] with Like.
Alright so.... plugged the C1500 in for a few hours, had to jump it and got it running. Of course those bloody side post terminal bolts are mangled from the previous owner and I couldn't pull the...
-
xavierny25 replied to the thread Guess The Next Poster II.Northcreek
-
1974 Olds Delta 88 1979 Buick Regal Sport Cpe 1983 Build Regal T-Type 1993 Chevy S10 4dr Blazer 2004 GMC Envoy XL
-
My last car was a 1980 320i. Painted Ferrari red. Surprisingly quick for a 2 liter four cylinder with mechanical fuel injection.
-
xavierny25 reacted to cornchip's post in the thread FOR SALE Nice 2-door for sale in Canada... with Like.
I just realized this Yukon 2 door has a Mexican build VIN (3). After doing some reading, 2 door Tahoe's and Yukon's were more popular in Mexico at the time, so that's where they were all built. I...
-
Just finished my water pump today, and learned some interesting lessons. It was a 45-minute job ... that took me two days actually. (Not too bad for me.) Subtract going to Home Depot for chain, a...
-
xavierny25 replied to the thread What are you doing today? [Part II].Over the weekend relocated a light fixture outlet box in the stairwell for a fancy new drop down light. I was able to access the box from the attic crawl space. I drove a screwdriver through the...
-
-
xavierny25 reacted to TJBaker57's post in the thread All modules failing randomly or different starting point? with Like.
Here is the wiring diagram for the data lines. It shows the splice pack, labeled SP205. The other one they show labeled SP206 is underneath the carpet under the back seat on the passenger side.
-
xavierny25 reacted to TJBaker57's post in the thread All modules failing randomly or different starting point? with Like.
Ahem.... or you may find a GAL in your area that has the knowledge and ability!!! ;)
-
xavierny25 reacted to TJBaker57's post in the thread All modules failing randomly or different starting point? with Like.
I am not at all surprised by your experience at the shop. I would be tempted to say that an overwhelming amount of mechanics are lost when it comes to elecrical issues. Many have no fundamental...
-
She resigned this morning too.
-
Such a pity.... https://www.usatoday.com/story/news/nation/2022/12/04/tampa-police-chief-taffic-stop/10833740002/
-
"All animals are equal, but some are more equal than others." Animal Farm by George Orwell.
-
-
Loading…
-
Loading…
