- Joined
- Nov 18, 2011
- Posts
- 49,665
What came in your mail today?
- Thread starter Mounce
- Start date
Mounce
Member
Some replacement led bars for my in-bumper mounted drl's on the Silverado. Have had them almost a year, ran at all times the truck is on during daytime and finally lost one. Had some water get in, maybe that's the culprit or maybe heat got to the leds. Who knows but for $10 a piece I'm not too sad. Just sad I've gotta pull it all back apart to replace them.
northcreek
Member
New blades for the JGC and belts for the plow truck (yes, V-belts) and as always, all came in big giant boxes..
Well, this is bureaucracy at its finest! From our trip last Xmas to Long Island. Postage to Canada came to $1.20 so total profit is $0.05 minus costs of the envelope, return envelope and the flyer to join EZpass as well as any labour involved. Heck, they probably owe me 
. Lol!
. Lol!Attachments
northcreek
Member
- Joined
- Jul 22, 2015
- Posts
- 2,724
$1.20! To throw the bag of mail over the crossing gate at Cornwall or Prescott?
What kind of scam is Canada Post running? LOL
Eventually, I want to get a reusable respirator, with cartridges you can swap out, but those may be tough to come by for a while, so I scooped up this disposable one.
Mainly wanted to be able to swap out the dust filters for fresh ones, which this one allows me to do since those are the ones that will get put to the most use. I have the cheaper fabric style respirators with the breathe vent, but they are a little too restrictive, so wanted to see if these are the same, or any better. I tend to get shortness of breath when shoveling or raking, and have to stop a lot more often to rest than I'd like, so chores take longer.
Mainly wanted to be able to swap out the dust filters for fresh ones, which this one allows me to do since those are the ones that will get put to the most use. I have the cheaper fabric style respirators with the breathe vent, but they are a little too restrictive, so wanted to see if these are the same, or any better. I tend to get shortness of breath when shoveling or raking, and have to stop a lot more often to rest than I'd like, so chores take longer.
- Joined
- Jul 22, 2015
- Posts
- 2,724
One of these...
Three guesses as to what I'll be doing (on the Sierra) this weekend?
Three guesses as to what I'll be doing (on the Sierra) this weekend?
75' of 10 gauge primary wire, and some flange bolts for my UPS upgrade project.
- Joined
- Nov 18, 2011
- Posts
- 49,665
- Joined
- Nov 18, 2011
- Posts
- 49,665
- Joined
- Nov 18, 2011
- Posts
- 49,665
northcreek
Member
Hard to find military grade Cosmoline, I spray my snow plow cylinders with it for outdoor summer storage. Great stuff for spare parts storage and undercoating though, a little pricey for that... 
Last edited:
Mounce
Member
New guts for the TB center console lid. The repair I had planned got back burner'd pretty swiftly once I got tired of gluing the puzzle pieces back together. Maybe I'll get it reassembled and installed by Tuesday.
New Work Fire Resistant pants, Credit card offers, and thats about it...
Set your ass on fire often?
Makes you wonder if liar liar, is in his job description somewhere...
Its those flaming burritos from the food truck.. Not protection for me, but for everyone else.Set your ass on fire often?
Mounce
Member
Matt
Member
- Joined
- Dec 2, 2011
- Posts
- 4,057
Ordered Tuesday for prime delivery tomorrow but arriving today, a new bed frame for the boy.
- Joined
- Nov 18, 2011
- Posts
- 49,665
Got the part for the fridge water distribution to hopefully stop it from leaking
Mounce
Member
Warranty replacement impact adapter from tekton. Broke the 1/2 to 3/8 adapter (who hasn't broken one?) and contacted them for warranty and they sent me the whole 4 piece set! I'm blown away. I mean, they're cheap enough but still, that's some reassuring service from the brand that I've decked my roll cart out in hand tool wise.
Also received ph0, ph1, ph2, and ph3 1/4 bit sockets I bought with rewards credit I had with them from buying directly through their website. Never thought I'd need or use Phillips bit sockets, only took me one time of using a bit adapter to go buy some. I hate dealing with 1/4 hex bits for some reason.
Also received ph0, ph1, ph2, and ph3 1/4 bit sockets I bought with rewards credit I had with them from buying directly through their website. Never thought I'd need or use Phillips bit sockets, only took me one time of using a bit adapter to go buy some. I hate dealing with 1/4 hex bits for some reason.
xavierny25
Member
Driver door module from ebay.
Not in the mail but I also picked up the Detroit axle cv axles that @Uncleenvoy no longer needed.
Not in the mail but I also picked up the Detroit axle cv axles that @Uncleenvoy no longer needed.
xavierny25
Member
They are! I currently have one from a 2004or2005. You have to have the trim pieces to match for it to fit correctly. I'm about to post pics of the swap in the "what did you do to your gmt today" thread.
BrianF
Member
Yesterday I rolled into the office and my order from rock came in. Ignition switch and vent solenoid for the TB. I paid for the absolute cheapest shipping rate and they were spot on that it would take 2 weeks to arrive. Still, the order was a shit ton cheaper than from amazon.
Mounce
Member
Milwaukee underhood light. This thing is nice, sure beats the fluorescent tube ones and is better than the moog promotional one at work. 1350 lumens spread across the length isn't as bright as I thought it would be but I'm sure it'll shed plenty of light to work by.
Matt
Member
- Joined
- Dec 2, 2011
- Posts
- 4,057
New drivers side Mevotech TTX TRE. I'll get it on sometime this week so I can get the alignment done on Saturday.
Mounce
Member
Yesterday a trans mount for the Silverado, carb and pump for brothers golf cart, Gearwrench pick set, and a set of wheel bolt alignment studs.
Today, denso compressor and acdelco accumulator/dryer for the Silverado. Got a liquid line w/ both service ports and orifice tube coming tomorrow since the high port started leaking after I did an ac service a month ago, the cap stops the leak but I don't roll like that lol.
Today, denso compressor and acdelco accumulator/dryer for the Silverado. Got a liquid line w/ both service ports and orifice tube coming tomorrow since the high port started leaking after I did an ac service a month ago, the cap stops the leak but I don't roll like that lol.
Matt
Member
- Joined
- Dec 2, 2011
- Posts
- 4,057
New router and a mattress pad for the boys new bed.
Direct from the land of 'Rona. An Android 10 HU with a backup camera and USB dash cam.
And from Amazon, some nifty T style wire taps.
And from Amazon, some nifty T style wire taps.
Sparky
Member
- Joined
- Dec 4, 2011
- Posts
- 12,927
Water softener unit. Tired of the terrible mineral buildup. Our water hardness is 17 grains, almost as hard as my old well water and this is a city water supply. Not looking forward to the higher water bill from regen cycles but whatever.
Upper rear control arms for the 97x. Intake check valve for the tank. Mothers day gift from duluth trading post, denim jacket