Jealous I am of that. Want to upgrade the 3rd brake light on mine, but none is available for the XUV 
What came in your mail today?
- Thread starter Mounce
- Start date
Mooseman
Moderator
They are the same. I looked up Avalanche 3rd brake light and used that on my EXT,
Oh wait, XUV. That funky truck. Yeah, might not work.
Oh wait, XUV. That funky truck. Yeah, might not work.
Mooseman
Moderator
Like I mentioned in "What are you doing today?", picked up 3 parcels in Og, a gas tank for a generator I'm fixing up, a shifter for the Caprice and a filter for my lawn tractor.
Blckshdw
Moderator
Couple of new D2S ballasts, as one of my old TRS ballasts died on me yesterday.
Mooseman
Moderator
A deep tranny pan, filter and gasket. Total $73USD including shipping. Not bad. Funny thing is the filter is more expensive than the pan!
HARDTRAILZ
Moderator
- Nov 18, 2011
- 49,665
Blckshdw
Moderator
Got a set of test leads for my meter, since sometimes the standard probes aren't right for the job. Came with a tweezer style set of probes for SMD work, standard set, retractable hook set, alligator clip attachments (which is what I really wanted), and some deep reach insulated attachments, which connect to the standard set. Also got a quick charge dual USB outlet that I'll install in the living room next to the couch, and take the existing USB charging outlet and put it in my bedroom.
Also got an LED, dual brightness, rechargeable, under hood work light. Fiddling with my small fluorescent light in the engine bay with no convenient places to hook it to, or doing stuff in the radio stack and having shadows in the way, will be a distant memory.
Comes with 2 light units with a hook on the end, that attach to a spring loaded frame. They can be rotated, or detached completely. A second set of hooks is provided to hang them horizontally, individually if you need/want to.
Due to the USB connections in the end, I don't think this will be a setup that's easily used while being plugged in.
Foldable frame may come in handy for floor based/underside work.
Also got an LED, dual brightness, rechargeable, under hood work light. Fiddling with my small fluorescent light in the engine bay with no convenient places to hook it to, or doing stuff in the radio stack and having shadows in the way, will be a distant memory.
Comes with 2 light units with a hook on the end, that attach to a spring loaded frame. They can be rotated, or detached completely. A second set of hooks is provided to hang them horizontally, individually if you need/want to.
Due to the USB connections in the end, I don't think this will be a setup that's easily used while being plugged in.
Foldable frame may come in handy for floor based/underside work.
northcreek
Member
REDLTZ
Member
That
That is right there is gonna be the reason for not getting frustrated and finishing something the next day there’s been so many times I have resorted to drinking a beer and calling it quits because of the sun going downGot a set of test leads for my meter, since sometimes the standard probes aren't right for the job. Came with a tweezer style set of probes for SMD work, standard set, retractable hook set, alligator clip attachments (which is what I really wanted), and some deep reach insulated attachments, which connect to the standard set. Also got a quick charge dual USB outlet that I'll install in the living room next to the couch, and take the existing USB charging outlet and put it in my bedroom.
View attachment 88653
Also got an LED, dual brightness, rechargeable, under hood work light. Fiddling with my small fluorescent light in the engine bay with no convenient places to hook it to, or doing stuff in the radio stack and having shadows in the way, will be a distant memory.
View attachment 88654
Comes with 2 light units with a hook on the end, that attach to a spring loaded frame. They can be rotated, or detached completely. A second set of hooks is provided to hang them horizontally, individually if you need/want to.
View attachment 88655View attachment 88656
Due to the USB connections in the end, I don't think this will be a setup that's easily used while being plugged in.
View attachment 88657
Foldable frame may come in handy for floor based/underside work.
View attachment 88658View attachment 88659
Matt
Member
- Dec 2, 2011
- 4,039
New ASIC running shoes yesterday...started running this morning.
littleblazer
Member
- Jul 6, 2014
- 9,267
xavierny25
Member
@littleblazer if it mods there's a thread for that 
.
If its stuff finding its way off the back of your truck then there is a real issue.
.If its stuff finding its way off the back of your truck then there is a real issue.
xavierny25
Member
Some bulbs from superbrightleds.com to repair the tail lights on the TBSS.
northcreek
Member
Upper control arms, lower ball joints, and a (not pictured) steering shaft bearing.
xavierny25
Member
It was Christmas today for the Voy and the TBSS.
All the rebuild parts for the front and rear brakes that are getting powder coated for the SS. Also a full set of tpms for the wheels that are also getting coated next week.
For the Voy a set of front hubs,inner and outer tie rod ends and the boots. Have to contact them since I'm not seeing the straps for the boots in the box or packaging although it was in the description when purchasing.
Lastly POR15 for the 4.10 rear axle I'm trying to get to sometime this yr. Lol.
Oh! and of course, for @northcreek I added a 10pack of 4.7mm led bulbs to that order just for kicks.
All the rebuild parts for the front and rear brakes that are getting powder coated for the SS. Also a full set of tpms for the wheels that are also getting coated next week.
For the Voy a set of front hubs,inner and outer tie rod ends and the boots. Have to contact them since I'm not seeing the straps for the boots in the box or packaging although it was in the description when purchasing.
Lastly POR15 for the 4.10 rear axle I'm trying to get to sometime this yr. Lol.
Oh! and of course, for @northcreek I added a 10pack of 4.7mm led bulbs to that order just for kicks.
northcreek
Member
Thanks!...going down the list I was getting a little worried but, then... bulbs!
djthumper
Administrator
See what happens when you just fill the cart up with everything down the aisles!
djthumper
Administrator
xavierny25
Member
They spelt my name wrong and sent the package to the wrong address. SMH. LOL
djthumper
Administrator
You too can go apply.They spelt my name wrong and sent the package to the wrong address. SMH. LOL
littleblazer
Member
- Jul 6, 2014
- 9,267
xavierny25
Member
I ain't that special so I got nuts and a 6 pack of chemical guy detailing towels.
xavierny25
Member
2 sets of Brakemotive front and rear brake rotors and pads for the Voy and the SS.
Matt
Member
- Dec 2, 2011
- 4,039
This new hotness got dropped off for testing for the golf website I'm a member of.
northcreek
Member
That would make a nice shift lever.... 
Last edited:
northcreek
Member
Blckshdw
Moderator
Nothing crazy but excited to get some new blades for my 42" riding mower. Sure made life easier to cut a few acres of grass and other random crap I like to run over.
Also got some new board games for my wife. Got another Catan extension, Explorers and Pirates.
We hit the store for snacks and some more beer and other random booze for a game night.
Also got some new board games for my wife. Got another Catan extension, Explorers and Pirates.
We hit the store for snacks and some more beer and other random booze for a game night.
Matt
Member
- Dec 2, 2011
- 4,039
Not in the mail, but ran up to Summit Racing last night after dinner and grabbed the last upper trailing arm...my drivers side one broke.
Mooseman
Moderator
Actually two days ago, received a new pair of Bates ankle boots and a 50' WiFi borescope to scope a couple of drains that have been giving me grief lately. Cheaper than getting a plumber to do it.
xavierny25
Member
Diff cover, bolts and gasket for the TBSS. I've got to get in there to do the axle end seals since they are bleeding, I noticed it when I was doing the rotors and pads a few weeks back.
I have to get it over to my brothers shop so he can powder coat it before we install.
I have to get it over to my brothers shop so he can powder coat it before we install.
xavierny25
Member
northcreek
Member
Xavier, all I can say is, you've got one hell of a wife....
littleblazer
Member
- Jul 6, 2014
- 9,267
xavierny25
Member
Rack & pinion 
Steering line seals just in case the new rack doesn't come with them.
If all goes well I'll be replacing the rack today.
Steering line seals just in case the new rack doesn't come with them.
If all goes well I'll be replacing the rack today.
xavierny25
Member
Not in the mail but I did score a set 20" tbss wheels I'll be refinishing for the Voy. 
I'm going to have my brother soak them in some b17 stripper, wash them off and get to sanding and polishing them myself. Its a lot of work but worth it in the final result.Or should I just get them powder coated? Color? I think polished is what the wife would like more. I've also got to start shopping around for a nice set of 275/45r20 tires for these.
The 18s are going to get new snow/winter tires and will be dedicated to winter wheels.
I'm going to have my brother soak them in some b17 stripper, wash them off and get to sanding and polishing them myself. Its a lot of work but worth it in the final result.Or should I just get them powder coated? Color? I think polished is what the wife would like more. I've also got to start shopping around for a nice set of 275/45r20 tires for these.
The 18s are going to get new snow/winter tires and will be dedicated to winter wheels.
northcreek
Member
