Please specify your definition of "line".
Line is the hard metal line. "Hose" is of course the rubber one. Since there are stainless hoses available, it can get confusing.
The 06-09 years are different as they are cast iron calipers with a different positioning of the hose.
Ok, I was thinking only the TBSS had the iron calipers, do all models use the iron front calipers after 05?
I know the SS, V8 and LWB models had the larger rotor and different caliper mount,
So all I need to do is source some front calipers from an 06+, or a V8, then I can switch to stainless hoses for my EXT?
I have a spare set(calipers) from my brother-in-law's SS If your interested. We replaced them a while back do to bleeder screws being stripped on the out side not internally and 1 of the outer piston seals not compressing right. If your really interested I can have the set cleaned up and even powder coat them. You'd have to buy all the seals and stuff and put them together on your end of course unless of course you'd rather I get it done.
Thanks man, I'll keep that in mind when I get more serious about that mod. I'll have to do some research on what it takes to rebuild them, seal kits look pretty cheap, so that's encouraging at least.
I thought my 06 calipers were aluminum.....never knew they were the iron. I did the larger rotors and swapped brackets 5 or 6 years ago.
All you need to swap to the larger rotors are the V8 brackets, which are available from RA. That's likely my next mod.
I just recently swapped over to braided stainless from Stop Tech on my 08 envoy.View attachment 87695