i changed both cv axles on my TB EXT LT and got an alignment because i needed it. however, once i got out of the alignment i noticed that when i make a u-turn, my turning is short. before i changed anything (with the old cv axles) i was able to make this u-turn at my house no problem and end up almost at the left lane. now, the wheel only goes so much and locks and im almost on top of the sidewalk on the right side.
i have a short wheel base trailblazer 2006 and it turns like my ext used to before the new cv axles.
is this is a problem with the cv axles (recv short ones vs longer ones? or a problem with the alignment?
if it is a problem with the lengh of the axles, wouldnt they NOT fit if they were too short/too long?
i have a short wheel base trailblazer 2006 and it turns like my ext used to before the new cv axles.
is this is a problem with the cv axles (recv short ones vs longer ones? or a problem with the alignment?
if it is a problem with the lengh of the axles, wouldnt they NOT fit if they were too short/too long?