Got some more done. Resined the complete inside of the box and duraglassed any joints that needed.
Then resined the complete outside of the box and nocked the baffled down and filled and sanded preparing it for paint.
Wired the box
I painted the baffle and wasnt really happy with it so i covered it in burgandy ( exterior vehical color) suede. Also put a coat of cheep spray paint on the rest of the box even though it wont be seen after trim panels are done.
Got the box bolted down this morning. Used four pieces of angle iron and four grade eight bolts. Dont think its going anywhere. Took pictures of one side other side is the same.
After a little setback ( had to unbolt and pull the box back out because it wasnt sitting flush with the floor because of the speaker wires were zip tied in a bundle instead of laying flat) Got back to the start of building the front trim.