Preparing a steering rack & pinion rebuild

[far eastan]

Good evening everyone.
I am planning a variety of repair and modifi, but the plan does not progress due to unplanned failures.
I don't plan to let go of this car, so there are many things I want to do.
One of them is a rack and pinion rebuild.
I am currently preparing before starting.
While collecting a lot of information, I saw someone looking for a rack and pinion mount bush.

Bush is produced by a company called KOTEC.
It is written as BS-1133.
According to the company's explanation, the category of the model does not seem to be appropriate.
It is for Trailblazer 02-09 S10.
The manufacturer is not listed, but I think this is probably.

Rack and Pinion Bushing Kit for Saab 9-7X 05-09 GMC Envoy 02-09 | eBay

Kit includes. BS-1133 x2. 2002-2009 GMCEnvoy. LEFT SIDE & RIGHT SIDE. 2005-2009 SAAB9-7X. 2003-2008 ISUZUAscender.

www.ebay.com

I feel very thin.
However, Trailblazer's rack may be in this form.

(SS is excluded) The rack and pinion seal kit was SK-8518.

Rack and Pinion Seal Kit for Chevrolet S10 Trailblazer 06-09 Ref. 8916 | eBay

2009-2006Chevrolet S10 Trailblazer Option Codes are on the Service Parts Identification sticker. 2005-2003Chevrolet S10 Trailblazer. 2002-2002Chevrolet S10 Trailblazer EXT LT. 2002-2002Chevrolet S10 Trailblazer Exc.

www.ebay.com

There are many other seal kits, so this information may not be necessary.

Attach the mount bush image.
I did not plan to replace the mount bush, but please let me know if this part is wrong.

thank you.

 

[Mooseman]

Both seem to be the proper parts and seals for your rack and pinion. It would be a good idea to get new inner tie rod ends as well as new bellows, which are not included in the kit.

More Information for DELPHI TA5038

More Information for DORMAN RPK92120PR

 

[far eastan]

thank you.
I was relieved that there was no mistake in the information.

Last year I replaced the inner and outer tie rod.
At that time, everyone gave me advice.
Therefore, tie rods and boots are mostly new. (lol)
Currently, the new Rack & Pinion has been replaced on the car, but I have a problem with the Total Turns Lock to Lock, so I want to rebuild and replace it again.