04 TB replacing both upper and lower control arms , strut, sway bar link first on the driver's side. My question is related to the lower control arm bracket placement. How do know how far in or out it should be. Since I took off the suspension yoke and strut, I don't have a real good idea how far in or out the replacement should be. When I put the control arm and bracket back in, I left the three bracket to frame bolts lose, put the strut and yoke back in place, and adjusted the lower control (in and out using crowbar)to meet the yoke and fit correct. Is this the correct way to get the lower control arm close ? Does an alignment at a shop then re adjust the lower control arm. Do shops get pissed when dyi guys bring vehicles for realignment