What are you doing today?

Aarkon · Mar 29, 2014

Into my third week of working everyday

djthumper · Mar 29, 2014

Off to Apex Peak to replace a roof that was partially torn off of the building that stores several repeaters.

dmanns67 · Mar 29, 2014

Running a few errands then heading to D.C. for the night.

Darkrider_LS · Mar 29, 2014

About to go work on the dub for a bit and look at a potential project.

TexazReece · Mar 29, 2014

Just pretty much cleaning up for the most part. Definitely gotta clean up the truck lol it hasn't been this dirty in awhile.

View attachment 33807.jpg]
View attachment 33808.jpg]

took a look at these while going through some stuff I have sitting in limbo waiting to be installed

View attachment 33809.jpg]

HARDTRAILZ · Mar 29, 2014

Taking care of kids while momma works

dmanns67 · Mar 29, 2014

One year of the West Virginia winter destroyed my "stainless steel" tip.

View attachment 33812

Replaced it this morning with another stainless steel tip, hopefully it will hold up.

View attachment 33813

JAB · Mar 29, 2014

At work trying to play catchup since I'm actually doing the jobs of two people right now and I spent my entire week getting nowhere while I trained my replacement for the old job. :eek:

I did get the windshield replaced in the TB this morning though. Just one more of the little things to check off the list to get it to adequate DD status. :smile:

Blckshdw · Mar 29, 2014

dmanns67 said:
One year of the West Virginia winter destroyed my "stainless steel" tip.

Replaced it this morning with another stainless steel tip, hopefully it will hold up.

Maybe spray it with some clear high heat/engine paint for protection?

Fire06 · Mar 29, 2014

Busy day today. Sold mother inlaws van for her, got my new bike set up, no not that kind a peddle pusher

dmanns67 · Mar 29, 2014

Blckshdw said:
Maybe spray it with some clear high heat/engine paint for protection?

Good idea, didn't think about that. I will have to pick some up.

HARDTRAILZ · Mar 29, 2014

Screwing w morons on Trailvoy Facebook page :wink:

jrSS · Mar 29, 2014

Fuckin morons!!!

jrSS · Mar 29, 2014

HARDTRAILZ said:
Screwing w morons on Trailvoy Facebook page

They aren't worth my trouble. There are 2 members on trailvoy. Hahaha.

HARDTRAILZ · Mar 29, 2014

He blocked me after he said he would have changed the name.

dmanns67 · Mar 30, 2014

Going to breakfast downtown DC then driving back to WV.

Ghoster · Mar 30, 2014

dmanns67 said:
One year of the West Virginia winter destroyed my "stainless steel" tip.

View attachment 21409

HOLY CHIT MAN! That's one year? We had a ton of snow this year, in fact 3rd most on record, but my tip didn't do that! Wow.... If that's what happens to stainless steel in WV I'm not going to visit ever!

And yes, clear coat the hell out of it, let it set up for a few days, and wax it.

CaptainKD · Mar 30, 2014

Nephew's 14th birthday party.

IllogicTC · Mar 30, 2014

Ghoster said:
HOLY CHIT MAN! That's one year? We had a ton of snow this year, in fact 3rd most on record, but my tip didn't do that! Wow.... If that's what happens to stainless steel in WV I'm not going to visit ever!

And yes, clear coat the hell out of it, let it set up for a few days, and wax it.

Stainless steel doesn't do well in low-oxygen, high-salinity, or poor-circulation environments. We definitely have had a high-salinity environment. They go bananas with the salt since it's all hills and mountains around here.

Blckshdw · Mar 30, 2014

Taking my POS 1/4" torque wrench back to harbor freight for a refund. :lipsrsealed:

TexazReece · Mar 30, 2014

Sitting back and resting on my B-Day :biggrin:

. I might take a trip to the outlet mall later.

Boricua SS · Mar 30, 2014

Happy Birthday bud :grouphug:

STLtrailbSS · Mar 30, 2014

Same here Reece except that whole resting thing. Working on the bday. 23 today getting old

Blckshdw · Mar 30, 2014

TexazReece said:
Sitting back and resting on my B-Day . I might take a trip to the outlet mall later.

STLtrailbSS said:
Same here Reece except that whole resting thing. Working on the bday. 23 today getting old

Happy birthday gents! :wootwoot:

dmanns67 · Mar 30, 2014

TexazReece said:
Sitting back and resting on my B-Day . I might take a trip to the outlet mall later.

STLtrailbSS said:
Same here Reece except that whole resting thing. Working on the bday. 23 today getting old

Happy B-Day fellas :2thumbsup:

TexazReece · Mar 30, 2014

dmanns67 said:
Happy B-Day fellas

Blckshdw said:
Happy birthday gents! :wootwoot:

STLtrailbSS said:
Same here Reece except that whole resting thing. Working on the bday. 23 today getting old

Boricua SS said:
Happy Birthday bud

Thanks guys :grouphug:

and Happy B-Day to you to STL :thumbsup:

:wootwoot: sorry you had to work and to that 23 being considered old :crackup:

.

ConeKilrAutoX · Mar 30, 2014

STLtrailbSS said:
Same here Reece except that whole resting thing. Working on the bday. 23 today getting old

TexazReece said:
Sitting back and resting on my B-Day . I might take a trip to the outlet mall later.

HAPPY BIRTHDAY :thumbsup:

blazinlow89 · Mar 30, 2014

Watching people have a meltdown because they can't handle the internet.

Happy B-day guys.

Fire06 · Mar 30, 2014

Sons birthday dinner

MAY03LT · Mar 30, 2014

A little update from my post yesterday.

Ripped out this professional shop garbage install. I didn't ask/didn't care who did it. To be fair, this unit was installed before the truck was retarded-loud.

I wonder if they made commission on t-taps and butt connectors. Despite the butchery, the ignition harness is salvageable.

Grounded to a painted piece of metal that was held on by one of four bolts. Pro.

Goodbye garbage. Obviously I can't show anything about the installation, but let's just say mine looks nothing like this. :cool:

djthumper · Mar 30, 2014

Just got back from being blown around at 3500' working on a roof. So windy we had to leave it for the day and not get the flashing and roofing up. The new roof is in place though.

yodaddy4200 · Mar 30, 2014

TexazReece said:
Sitting back and resting on my B-Day . I might take a trip to the outlet mall later.

Happy Birthday man!! :smile:

You too STL!!

TexazReece · Mar 30, 2014

MAY03LT said:
A little update from my post yesterday.

Ripped out this professional shop garbage install. I didn't ask/didn't care who did it. To be fair, this unit was installed before the truck was retarded-loud.

I wonder if they made commission on t-taps and butt connectors. Despite the butchery, the ignition harness is salvageable.

Grounded to a painted piece of metal that was held on by one of four bolts. Pro.

Goodbye garbage. Obviously I can't show anything about the installation, but let's just say mine looks nothing like this.

He picked the right person to hook it all up the professional way. Your work is highly respected :thumbsup:

Fire06 · Mar 30, 2014

It is always fun fixing someone else mess.

HARDTRAILZ · Mar 30, 2014

Had birthday celebration for daughter!

MAY03LT · Mar 30, 2014

TexazReece said:
He picked the right person to hook it all up the professional way. Your work is highly respected

Thanks man! I just wish I could do this kind of work for my normal 9-5. Shops want quantity. I want quality. Wait - that's how my current job is. :lipsrsealed:

Fire06 said:
It is always fun fixing someone else mess.

Indeed. The last custom truck that I rewired was possibly the worst that I've seen. We're talking a fire hazard on wheels. That truck has some more work to be done before I can be totally finished with it - I'll post that up when it's done. It may be debuting the Carlisle show.

ConeKilrAutoX · Mar 31, 2014

Figured out what I need for exhaust cutouts on the crown vic and got all the parts in that I needed to get the Voy back up and running!

and watched this....WOW....

They Had To Kill A Random Person For Gang Initiation

Playsinsnow · Mar 31, 2014

ConeKilrAutoX said:
Figured out what I need for exhaust cutouts on the crown vic and got all the parts in that I needed to get the Voy back up and running!

and watched this....WOW....

They Had To Kill A Random Person For Gang Initiation

Wow is right.

dmanns67 · Mar 31, 2014

ConeKilrAutoX said:
and watched this....WOW....

They Had To Kill A Random Person For Gang Initiation

Thats amazing.

Start of a great Monday. 4 hour power outage at the plant and no machines or robots will run :no:

HARDTRAILZ · Mar 31, 2014

The work thing

What are you doing today?

Attachments

Attachments

Forum Statistics

Share This Page