Post A Pic Of Your GMT RIGHT NOW!!!

It was just me about 5:30 in the morning going to work. Goes to the shop to get all pretty and shiny again tomorrow. Gonna be a long week without it!
 
Post has been taken care of for ya aarkon
 
  • Like
Reactions: Aarkon
Parked for the first time at the new place. First unload. Snug fit in the carport. People could do some damage on the passenger side if not careful. :worried:

20140627_160958_zps6knptltn.jpg
 
Finally have some time to paint my cowl and wiper arms :celebrate:

Had a little mishap though. Washer nozzle on passenger side must have been a little brittle and snap at the base when trying to remove the rubber fitting :duh:

30 minute drive and $20 spent at the stealership :no: What an expensive piece of plastic.

uploadfromtaptalk1403904032073.jpg
 
dmanns67 said:
Finally have some time to paint my cowl and wiper arms :celebrate:

Had a little mishap though. Washer nozzle on passenger side must have been a little brittle and snap at the base when trying to remove the rubber fitting :duh:

30 minute drive and $20 spent at the stealership :no: What an expensive piece of plastic.

attachicon.gif
uploadfromtaptalk1403904032073.jpg
I broke my passenger side too but I glued mine back on and have had no problems yet
 
  • Like
Reactions: dmanns67
dmanns67 said:
Finally have some time to paint my cowl and wiper arms :celebrate:

Had a little mishap though. Washer nozzle on passenger side must have been a little brittle and snap at the base when trying to remove the rubber fitting :duh:

30 minute drive and $20 spent at the stealership :no: What an expensive piece of plastic.

attachicon.gif
uploadfromtaptalk1403904032073.jpg
lol I hung my wiper arms from my garage door when I painted too. funny :)
 
  • Like
Reactions: dmanns67
Blckshdw said:
Parked for the first time at the new place. First unload. Snug fit in the carport. People could do some damage on the passenger side if not careful. :worried:

20140627_160958_zps6knptltn.jpg


Damn that looks like a tight fit.
 
Ghoster said:
Parked for the first time at the new place. First unload. Snug fit in the carport. People could do some damage on the passenger side if not careful. :worried:
20140627_160958_zps6knptltn.jpg
Damn that looks like a tight fit.
It is. Can't even open the doors to the first check stop. When I have a passenger, I'll either leave it in the driveway, or back into the carport, with the nose sticking out so they can open the door all the way under the overhang. :yes:
 
Blckshdw said:
It is. Can't even open the doors to the first check stop. When I have a passenger, I'll either leave it in the driveway, or back into the carport, with the nose sticking out so they can open the door all the way under the overhang. :yes:
Time to trade the old girl in for a Smart car.
 
Went and surprisingly found mountain mud. Not a whole lot, but some. ImageUploadedByTapatalk1404400577.968212.jpg

ImageUploadedByTapatalk1404400617.334100.jpg
Sorry for the double post. It wouldn't let me attach this photo as well.
 
dmanns67 said:
SS wheels look awesome :salivate: How do you like the ride?
I can feel the road a bit more, but I think it actually rides smoother than it did with the 17's.
 
24v 4.2 said:
I can feel the road a bit more, but I think it actually rides smoother than it did with the 17's.
That was my initial thought when I got my SS wheels. My tires had about 4/32 of tread left. Once I got new tires on the SS wheels, the ride was very smooth and longer felt every bump/crack in the road.

What tires do you have 255/50?
 
  • Like
Reactions: CaptainKD
dmanns67 said:
That was my initial thought when I got my SS wheels. My tires had about 4/32 of tread left. Once I got new tires on the SS wheels, the ride was very smooth and longer felt every bump/crack in the road.
What tires do you have 255/50?
Yep 255/50. Not a bad ride; I'm probably just paying more attention to the ride than I was.
 
  • Like
Reactions: dmanns67
Chllin in the shade
 

Attachments

  • batman!.png
    batman!.png
    354.6 KB · Views: 33
Now you just need to put a drop kit on it! :yes: :thumbsup:
Funny you should say that considering I have a Belltech Lowing Kit that I still need to have put on :biggrin: . -2 in the front, -3 in the rear (PN#795sp). I wanted to have someone put it on for me, but all these shops around here quoted me outrageous prices. I've had it for like 4 months already :mad: I feel like me and my bud might screw it up even though he's very knowledgeable.

That's a sexy shot of your truck. :thumbsup:
Thank you bud, truck just got back from a fresh wash before I took the picture
 
  • Like
Reactions: CaptainKD
Aarkon said:
Those are some sexy rims
Thanks man, they're 18" inch Verde Protocol's. I just love the brushed aluminum face with the rest of the wheel being gloss black. Really makes the wheels POP! I get a lot of compliments on them. Makes me feel good about my truck :thumbsup:
 
  • Like
Reactions: Aarkon
Yup 18's, my stock wheels were 16", now they just sit in storage
 
  • Like
Reactions: dmanns67 and Aarkon
Capote said:
Funny you should say that considering I have a Belltech Lowing Kit that I still need to have put on :biggrin: . -2 in the front, -3 in the rear (PN#795sp). I wanted to have someone put it on for me, but all these shops around here quoted me outrageous prices. I've had it for like 4 months already :mad: I feel like me and my bud might screw it up even though he's very knowledgeable.


Thank you bud, truck just got back from a fresh wash before I took the picture
The only way to learn is by doing it, and if you screw something up, well, yeah you gotta fix it, but that's also how you learn. Been there done that.
 

Forum Statistics

Threads
24,011
Posts
645,909
Members
20,113
Latest member
Joatmon

Members Online