- Nov 20, 2011
- 848
How to clean a Inline 6 Throttle Body
Difficulty: Easy
Estimated Time: 30 Min
Part Numbers: N/A
Cost: $2-$5
Supplies Needed:
* Flathead Screw Driver
* Wrench
* 8 MM Wrench Bit
* 10 MM Wrench Bit
* Throttle Body Cleaner
* Some old rags
Optional Supplies:
* Wrench Extender (highly recommend)
* A Pepsi
* Some Music
STEP 1:
Disconnect the negative battery terminal with the 8 MM wrench bit
STEP 2:
Remove Intake
STEP 3:
Remove Resonator
STEP 4:
Remove Throttle Body
STEP 5:
Clean the Throttle Body
STEP 6:
Put everything back together. Make sure all your connections are secure, and connect the negative terminal again and start it up.
Difficulty: Easy
Estimated Time: 30 Min
Part Numbers: N/A
Cost: $2-$5
Supplies Needed:
* Flathead Screw Driver
* Wrench
* 8 MM Wrench Bit
* 10 MM Wrench Bit
* Throttle Body Cleaner
* Some old rags
Optional Supplies:
* Wrench Extender (highly recommend)
* A Pepsi
* Some Music
STEP 1:
Disconnect the negative battery terminal with the 8 MM wrench bit
STEP 2:
Remove Intake
STEP 3:
Remove Resonator
STEP 4:
Remove Throttle Body
STEP 5:
Clean the Throttle Body
STEP 6:
Put everything back together. Make sure all your connections are secure, and connect the negative terminal again and start it up.