Found a parts TB.......so we took some parts off.

[Denali n DOO]

When my friend was getting ready to do the axle seal on his '03 TB his other buddy said he had a TB sitting in the yard and we could go take whatever we wanted but most good stuff was gone. Not knowing the condition of his axles we decided to take the axles out, just in case we needed one plus we learned a bit by taking them out, so that's 4 axles we removed over 3 days, having his compressor and air tools helped. We took the disconnect as well but it was hard to get off, maybe because it was in 4lo. We also the took tail lights and the back glass with third brake light piece. In the pics you can see his pewter color rear plastic piece with third brake light in it is all lifting and ready to fly off. The brackets are all bent to shit. Hopefully the plastic piece will be easy to swap out.

If anyone see's anything they want let me know and I'll see about getting it off. The parts are free but not many good ones left. It has a G80 rear end in it.

 

[MAY03LT]

Wow that's awesome!

Looks like an 02 - I can't see it in the pic, but if it's there, any chance you can grab the glove box light and connector for me?

Someone should call dibs on the underhood light and connector too. My 03 has the cutouts for it under the hood liner.

 

[tblazerdude]

I could use the passenger tail lamp connector harness. You could cut it where it enters the truck, I just need to splice it.

 

[tblazerdude]

I need it cut where the top arrow is. I specifically need that plastic connector where the lower arrow is.

View attachment 29089

 

[triz]

I could use the rear latch and actuator. Mine wont lock. Just PM me with shipping to 33711 and Ill paypal you.

 

[Grimor]

Is there an center console lid kicking around?

 

[DDonnie]

Is there an center console lid kicking around?

Haha, now that's just wishful thinking

 

[scotblazer]

is the transmission still there or the cup holders?

 

[shrek77]

Is the transmission mount intact? Mine clicks when accelerating from complete stop and when coming to a stop.

 

[wesman43]

Headlight clips?maybe? No prolly not lol

 

[Mooseman]

Hey Denali, you do realize that you just opened yourself up to get bombarded.

 

[Denali n DOO]

I could use the passenger tail lamp connector harness. You could cut it where it enters the truck, I just need to splice it.

I'll go cut it off tonight.

I could use the rear latch and actuator. Mine wont lock. Just PM me with shipping to 33711 and Ill paypal you.

I'll look at it again, I recall the latch being really rusty, I'll take a pic so you decide if it's worth the shipping cost.

Is there an center console lid kicking around?

No, it's gone. Funny it looked like console was cut out...

Wow that's awesome!

Looks like an 02 - I can't see it in the pic, but if it's there, any chance you can grab the glove box light and connector for me?

Someone should call dibs on the underhood light and connector too. My 03 has the cutouts for it under the hood liner.

Hell, that's a tough order to fill, I was trying to stay away from the glove box , when I was trying to read the option codes I almost ended up with this on my head, I would have done huge freak out and made quite a scene...

Spoiler

View attachment 29099

is the transmission still there or the cup holders?

Cup holders gone, not sure if the tranny was spoken for. How would you claim that prize, come pick it up?

Is the transmission mount intact? Mine clicks when accelerating from complete stop and when coming to a stop.

I'd have to look, where is the mount front or back? Got a pic of what it is?

Headlight clips?maybe? No prolly not lol

No, gone....

Hey Denali, you do realize that you just opened yourself up to get bombarded.

That's okay, if I can help someone out I will be pretty happy . Most of my threads are asking for help because I don't know how to do most repairs nor do I have the proper tools. It's the replies to those threads that gives me the confidence to go rent (for free) the proper tools and try doing a repair I never would have dreamed of doing before I joined the forum. To me this is just a small way to contribute back to the community. The only downfall I think will be the shipping cost from here to the US.

We haven't been there since Thursday so I'll have to update later today when I can confirm what's still available.

 

[tblazerdude]

I'll go cut it off tonight.

thanks! shipping to 60506. PM me with the price and I can paypal you.

 

[MAY03LT]

Hell, that's a tough order to fill, I was trying to stay away from the glove box , when I was trying to read the option codes I almost ended up with this on my head, I would have done huge freak out and made quite a scene...

I clicked the spoiler, no sleep for me tonight!

 

[shrek77]

Here's a pic of it four bolts.View attachment 29101

 

[UMEXT]

Looks like the cover for the floor compartment is still there. If it's in decent condition, I could use that. And thanks.

 

[Berzerk]

I'll go cut it off tonight.
That's okay, if I can help someone out I will be pretty happy . Most of my threads are asking for help because I don't know how to do most repairs nor do I have the proper tools. It's the replies to those threads that gives me the confidence to go rent (for free) the proper tools and try doing a repair I never would have dreamed of doing before I joined the forum. To me this is just a small way to contribute back to the community. The only downfall I think will be the shipping cost from here to the US.

You are definitely a good dude!

 

[Boog2006]

I'm interested in the G80...do you have any more information on it? is it an 8.0" ? Gear ratio?

 

[HARDTRAILZ]

I want the doors... Could make half doors actually happen.

 

[Sparky]

Hm what condition is the rear wheel well sheet metal in? If it isn't rusty, could you cut out a chunk of both quarters so I can weld it onto mine

 

[silversho]

How much for the heat/AC control unit for the front? Shipped to 58503. Thanks.

 

[Porkins]

I
No, it's gone. Funny it looked like console was cut out...

He might of had a Havis radio/scanner console installed. That would explain it be hacked up.

 

[Ghost]

He might of had a Havis radio/scanner console installed. That would explain it be hacked up.

Was going to ask if this havis console was for sale ?

 

[Boog2006]

Perhaps we ran him off...

 

[Denali n DOO]

I'm interested in the G80...do you have any more information on it? is it an 8.0" ? Gear ratio?

Going there now. I'll check it out.

 

[Boog2006]

Thanks! I really appreciate it!

 

[Denali n DOO]

Sorry bout the big delay, my 17 month holiday (severance) came to an end recently and I had to find a job. After a few weeks on a new job working 3 am to 9am I found a better job 5 am to whenever. For one week I was doing both jobs. But I did get back to the TB.

The tranny, rear dif GU6 G80, HVAC control, stereo and instrument cluster are spoken for. The rear floor cover was in pretty rough shape as seen in the first pics. Here's what I did get. Some stuff is not yet spoken for. I remember on another thread someone asking about the black trim pieces beside the rear hatch window. I don't know who it was but I got those too.

Have a look at the pics closely and decide if you want the item shipped or not. Send me a PM with your shipping info and how you want it shipped regular mail, Fed Ex, UPS. There is no charge for any of these parts, just cover your own shipping costs.

1. Hood Light - MAY03LT
2. Rear Lamp Harness - tblzerdude
3. Glove Box Light (trim piece is cracked near bolt hole) - MAY03LT
4. Rear Latch (Looks kinda rusty) - triz
5. Tail Lamp Boards - available
6. Door Switches - available
7. Liftgate Module - available
8. Liftgate Window Trim - available

 

[Grimor]

sorry if already addressed, how about the shifter assembly, or just the shift brake interlock

 

[triz]

By module do you mean the actuator because that is what I need. Shipping would be to 33747. I can clean up the latch. Mine is working at the moment but the actuator is not.

 

[Grimor]

By module do you mean the actuator because that is what I need. Shipping would be to 33747. I can clean up the latch. Mine is working at the moment but the actuator is not.

I haven't actually taken mine apart yet to see what exactly is going on with it. I'll try to get it all apart tomorrow and see what looks broken

 

[gmcman]

Is the ECM avail? If that's an 02 I may be interested.

 

[Denali n DOO]

Is the ECM avail? If that's an 02 I may be interested.

where is the ECM? haven't seen that yet.....

 

[Sparky]

It is attached to the intake on the engine. Driver side.

 

[Denali n DOO]

By module do you mean the actuator because that is what I need. Shipping would be to 33747. I can clean up the latch. Mine is working at the moment but the actuator is not.

I think this is the liftgate module.....

 

[gmcman]

where is the ECM? haven't seen that yet.....

Also the TB harness with about 12" of wires should be enough.

 

[gmcman]

Now that I think about it, does it matter if the ECM is a Canadian version?

 

[Sparky]

Now that I think about it, does it matter if the ECM is a Canadian version?

I doubt it as you'd have to flash it with your truck's stuff anyway.

 

[Denali n DOO]

Now that I think about it, does it matter if the ECM is a Canadian version?

It's a US vehicle,...but that part is gone, i thought that was the PCM.....

 

[Boog2006]

Thanks for checking on the rear end for me.

 

[Conner299]

If that parts Blazer is still around, I need something if they are still there. Its a piece of weather stripping that goes between the front and rear door. Runs from about the bottom of the window, to the top of the door. Need both sides. Price and shipping to 40299?