Recently had fix a leaky gasket trans pan twice within 2 months. 1st fix it ran fine and had no SES light. 2nd fix and it keeps blowing a 10amp fuse located on the drivers side fuse box with all theses codes...
p0740,p0753,p0758,p0785 and p1860
The car is in limp mode with a SES light. Also some of the instrument gauges aren't functioning along with the gear selector isn't lit. I replaced the ignition switch but didn't fix the issue.
The car is 15 yrs old and I'd hate to take it to the dealership if it's some other DIY fixable issue.
Anyone experience or can direct me in the right direction?
Thanks
p0740,p0753,p0758,p0785 and p1860
The car is in limp mode with a SES light. Also some of the instrument gauges aren't functioning along with the gear selector isn't lit. I replaced the ignition switch but didn't fix the issue.
The car is 15 yrs old and I'd hate to take it to the dealership if it's some other DIY fixable issue.
Anyone experience or can direct me in the right direction?
Thanks
Last edited: