Recent content by SpeedUp

Thank you for your reply. I did the 'one man, brake bleed bottle with line submerged in new clean brake fluid, and pump the brakes' method I will flush that out asap, ty again MM

I recently changed out the stock rotors and pads on my 2008 TB 4.2. Truck has 120,000 miles on it. I used the brake kit I found on 1aauto.com with ceramic pads that comes with front and rear rotors and pads. I think the cost was around $250.. I removed as much of the old fluid as I could from...

Took your advice and moved it from the front IGN fuse to a fuse that isn't used. My 2008 has a RAIN fuse in the rear fuse box. I think this was used for the rain sensing wipers that my truck doesnt even have. If anyone is considering these warmers, go ahead and order them, they are...

I looked for TCCM fuse, is it labeled as something else? What fuse # is it ?

Sorry no pics, but will tell you what I did with detail :smile: The hardest part of the whole install were dealing with the hog rings, and deciding where to tap power. The seat is a little heavy/awkward to remove. Installing the heating pad: To make the job easier on the bottom cushion I...

great pics and writeup, thank you!

I bought a relay to use. I tapped power directly at the battery. Is it OK to tape it at the mega fuse? Attached pic shows where I put it in yellow circle. For leg 86 its ok to use tap any switched fuse with a fuse tap? Sorry for all the questions, I really do not want to hurt anything lol.

This is a follow up to my thread on installing 'upgrades' to my truck. I am installing the dorman heated seat kit tomorrow. I was going to use one of my fuse taps on the rear fuse box. Is there a circuit in there that would be safe to use? I see the 20amp fuse for the sun roof, is that...

Just purchased the Dorman universal heated seat kit (628-040). Now I have a Saturday project :2thumbsup:

Cluster sounds interesting, is that a plug-n-play job? What about the mileage?

Were seat warmers an option on these trucks? If so, would I have the wiring harness needed already maybe? I have cloth seats if that matters

My 2008 TB is a LS base model. I wanted to add a few easy upgrades and creature comforts, so... * I added the dimming rearview mirror with compass and outside temp * Installed the side mirrors with turn signals and defrost * Added homelink buttons for my garage door * PCMofNC tranny cooler *...

Just wondering how long you plan on keeping your TB/Envoy. I do not have any intention on selling mine in the foreseeable future, or at least until I am no longer able to get parts. I really do love this truck. Even at 11 years old, it still drives really nice, and is perfect for what I need...

Was there ever a group started? As these trucks get older, would be nice to have a group of people who are willing to help each other out. I live in McKinney

Thank you so much for the document! Yes, I see in the diagram I am missing the bushing shown as part #4.