Hello all,
Was wondering whether anyone has the troubleshooting procedures for the MAF Sensor on a 2006 4.2 engine. I had already pulled it and cleaned it using CRC MAF Sensor Spray. I would like to know which wire on the connector to back-probe, and the expected voltages with ignition on, at idle, and at higher RPM's.
Thanks
Was wondering whether anyone has the troubleshooting procedures for the MAF Sensor on a 2006 4.2 engine. I had already pulled it and cleaned it using CRC MAF Sensor Spray. I would like to know which wire on the connector to back-probe, and the expected voltages with ignition on, at idle, and at higher RPM's.
Thanks