Hello
New to this forum
I have a 2007 Trailblazer
4.2 4wd
Was having an issue with stabilitrak causing power cutout, bad front hubs would flash warning light on dash, and ABS would act up between 5 and 10 mph
fine at anything greater than that. my mechanic was away so I pulled the ABS fuse and was left like that for a few weeks.
Replaced front hub assemblies, put fuse back but still have the three trouble lights on dash.
Is there anyway to clear them, tried battery disconnect and that taught me to never do that again.
Have only a basic OBDII scanner which hooks up to a laptop
Everything seems to function - would just like to lose the lights
Any Suggestions?
Thanx in advance for any help.
Jim
New to this forum
I have a 2007 Trailblazer
4.2 4wd
Was having an issue with stabilitrak causing power cutout, bad front hubs would flash warning light on dash, and ABS would act up between 5 and 10 mph
fine at anything greater than that. my mechanic was away so I pulled the ABS fuse and was left like that for a few weeks.
Replaced front hub assemblies, put fuse back but still have the three trouble lights on dash.
Is there anyway to clear them, tried battery disconnect and that taught me to never do that again.
Have only a basic OBDII scanner which hooks up to a laptop
Everything seems to function - would just like to lose the lights
Any Suggestions?
Thanx in advance for any help.
Jim