I installed a new steering wheel sensor lastnight and as soon as I got done the light came back on with a turn of the wheel. After doing some reading today it looks like I missed a critical step. When it says to remove the anti rotation pin can someone help me out on that. There was a little spring that I was worried about not bending. Would that be the pin they are referring to
steering wheel position sensor
- Thread starter 08 denali
- Start date
AtlWrk
Member
- Dec 6, 2011
- 674
View attachment 32739The silver spring with the pin down the middle?
Yes, that needs to be removed. That's just to keep it aligned for shipping/installation. Turning the wheel with it still installed will almost certainly damage the sensor
Yes, that needs to be removed. That's just to keep it aligned for shipping/installation. Turning the wheel with it still installed will almost certainly damage the sensor
Attachments
AtlWrk said:View attachment 20143The silver spring with the pin down the middle?
Yes, that needs to be removed. That's just to keep it aligned for shipping/installation. Turning the wheel with it still installed will almost certainly damage the sensor
Ye I think I wasted a bill. lol Thanks for the pic
