Any tips or tricks to replacing this that I should know? It's a 2000 Silverado with 5.3L
Pondscum3310 Original poster Member Jul 9, 2018 14 Houston, TX Jul 10, 2018 #1 Any tips or tricks to replacing this that I should know? It's a 2000 Silverado with 5.3L
Mooseman Moderator Dec 4, 2011 25,347 Ottawa, ON Jul 10, 2018 #2 Not really a difficult or complicated job. Just add some grease to the splines/inside yoke to prevent clunking noises. Reactions: smt 59
Not really a difficult or complicated job. Just add some grease to the splines/inside yoke to prevent clunking noises.
Pondscum3310 Original poster Member Jul 9, 2018 14 Houston, TX Jul 28, 2018 #3 When replacing a rear output seal on a 2000 silverado, may I recommend enchilada green sauce to press the new seal back in. El perfect. Attachments image.jpg 584.3 KB · Views: 8 Reactions: BrianF
When replacing a rear output seal on a 2000 silverado, may I recommend enchilada green sauce to press the new seal back in. El perfect.
B BrianF Member Jul 24, 2013 1,193 West central Sask. Nov 18, 2018 #4 I am looking at this very job this winter on my 1993 K1500 2wd rez truck. Have to check and see if the output shaft bushing is still good, does not look too daunting. ....
I am looking at this very job this winter on my 1993 K1500 2wd rez truck. Have to check and see if the output shaft bushing is still good, does not look too daunting. ....