Hi All
While under the Envoy yesterday doing u-joints I noticed the seal on the pinion yoke has started to leak. I topped up the gear oil but this will need to be replaced before winter.
I was looking for crush sleeves on ROck Auto and got somewhat confused. Take a look at how they list them, I've got RPO codes GU6 and G80 so mine is a limited slip 8" 3.42:1
Line one says it fits the GT5, Can I read that to mean with or without G80?
Line 2 says it fits the GU6, Can I read that to mean with or without G80?
Line 3 says it fits the GT4 with G80
Line 4 says it fits the GT4 except with G80
Anyone got a part number for for the crush sleeve on an 8" 3.42:1 LSD?
While under the Envoy yesterday doing u-joints I noticed the seal on the pinion yoke has started to leak. I topped up the gear oil but this will need to be replaced before winter.
I was looking for crush sleeves on ROck Auto and got somewhat confused. Take a look at how they list them, I've got RPO codes GU6 and G80 so mine is a limited slip 8" 3.42:1
GM GENUINE 09785792 Info
Fits Rear; Rear; Envoy Base Model; .058-.071'" Thick; 4.10 Rear Axle Ratio (GT5)
or Rear; Rear; Envoy Base Model; .058-.071'" Thick; 3.42 Ratio (GU6)
or Rear; Rear; Envoy Base Model; .058-.071'" Thick; 3.73 Rear Axle Ratio (GT4), Positraction Limited-Slip Rear Axle (G80); 4 Speed Automatic Trans.
or Rear; Rear; Envoy Base Model; Exc. Positraction Limited-Slip Rear Axle (G80), Limited Slip Differential (G86); .058-.071'" Thick; 3.73 Rear Axle Ratio (GT4); 4 Speed Automatic Trans.
Line one says it fits the GT5, Can I read that to mean with or without G80?
Line 2 says it fits the GU6, Can I read that to mean with or without G80?
Line 3 says it fits the GT4 with G80
Line 4 says it fits the GT4 except with G80
Anyone got a part number for for the crush sleeve on an 8" 3.42:1 LSD?
Last edited: