- Dec 12, 2011
- 4,656
So I've tried a cheap aftermarket, and one from the dealer, the end result is I have full.cold and full hot, but anything in between is like a slow moving seesaw.
As far as the temp control or "blend" I believe it may be referred to as, when installing, I cannot get the actuator lined up without rotating the actuator motor and this may be my issue.
Any tips, or proper methods for installing these actuators would be appreciated.
For the record, I've done every chicken dance in regards to calibrating to no avail.
I want to finally get the temp control working properly, I do hear the air being drawn in from the side pillar so I assume that's working.
As far as the temp control or "blend" I believe it may be referred to as, when installing, I cannot get the actuator lined up without rotating the actuator motor and this may be my issue.
Any tips, or proper methods for installing these actuators would be appreciated.
For the record, I've done every chicken dance in regards to calibrating to no avail.
I want to finally get the temp control working properly, I do hear the air being drawn in from the side pillar so I assume that's working.