add another issue to the list with my truck..... last week I started seeing wet spots when parked and seen the power steering cooler was rusted and leaking... amazon and prime got me the dorman brand next day , install was simple enough , the bumper comes off stupidly easy thank god. that was last Saturday , now its Thursday sand I see a wet spot again... now its the line / lines over the strut tower.
im guessing that the pressure is higher without the cooler leak and it blew out the next weakest place.
I already had the rusting and was planning on replacing them , just not so soon after spending $140 last week.
I read all the threads but am missing to parts of info that would be helpful...
1. I am looking at the ad-delco hoses #36-365451 & 36-36781 365451 states to remove the cup seal , vs Gates 365883 is oem design , which is easier ( im think oem design but cant find ac delco brand )
2. every posy I found talks about where the lines connect to the rack and the hold down clamps... any tips on how to remove from the pump side ?
on a side not in a post a while back I was talking about a vibration type noise /feel I couldn't pin down. I changed the black fluid when I got the truck , but it was still there.... after the cooler install and a new quart of fluid the vibration is almost non existent... could there have been cavitation in the pump with the cooler leaking so slight I didn't see the leak ?
im guessing that the pressure is higher without the cooler leak and it blew out the next weakest place.
I already had the rusting and was planning on replacing them , just not so soon after spending $140 last week.
I read all the threads but am missing to parts of info that would be helpful...
1. I am looking at the ad-delco hoses #36-365451 & 36-36781 365451 states to remove the cup seal , vs Gates 365883 is oem design , which is easier ( im think oem design but cant find ac delco brand )
2. every posy I found talks about where the lines connect to the rack and the hold down clamps... any tips on how to remove from the pump side ?
on a side not in a post a while back I was talking about a vibration type noise /feel I couldn't pin down. I changed the black fluid when I got the truck , but it was still there.... after the cooler install and a new quart of fluid the vibration is almost non existent... could there have been cavitation in the pump with the cooler leaking so slight I didn't see the leak ?