Redbean77
Member
Have an '07 Silverado 1500 5.3L FX1. BOLT for the high pressure and return lines to rack and pinions was broken. Replacing cap seals and need to know the exact either size or part number PLEASE!!!
Power steering hose bolt
- Thread starter Redbean77
- Start date
Welcome to GMT Nation...
THIS Link has the information that will help... Just be mindful NOT to try and use any Cheap Mild Steel, Low Grade Replacements...
The Solution came via responses from @coolasice and from @cornchip:
gmtnation.com
THIS Link has the information that will help... Just be mindful NOT to try and use any Cheap Mild Steel, Low Grade Replacements...
The Solution came via responses from @coolasice and from @cornchip:
Snapped bolt holding power steering line to rack and pinion
Need help. I was replacing the power steering lines due to rust and managed to over torque the bolt that attaches the lines to the rack and pinion. Does anyone know where I can find that bolt or the dimensions. I got the part out that snapped but need to replace it.
gmtnation.com
Last edited:
Just be forewarned that that thread is for a GMT360 and may not be the same as the full size trucks, however, is likely the same.Welcome to GMT Nation...
THIS Link has the information that will help... Just be mindful NOT to try and use any Cheap Mild Steel, Low Grade Replacements...
The Solution came via responses from @coolasice and from @cornchip:
Snapped bolt holding power steering line to rack and pinion
Need help. I was replacing the power steering lines due to rust and managed to over torque the bolt that attaches the lines to the rack and pinion. Does anyone know where I can find that bolt or the dimensions. I got the part out that snapped but need to replace it.