06Envoy said:What about a set like these?
I've been looking for a set as well for the wifey's TB. These are what we've settled on so far.
Stock looking, but with LED's.
[EBAY]220934251395[/EBAY]
trailblazer075 said:
trailblazer075 said:I have not understood the question.Excuse me my English is not perfect.
But the bulbs are white and the bottom of the body light
Sparky said:Those lenses aren't nice looking at all, they remind me of something out of the 80s...
ItsOnVoy said:I am not a big fan of how those look!
trailblazer075 said:Original of mine is like this pictures but inverse the rear frog is on the left And back light is on right
BO TIE SS said:Oh, didn't you hear? I'm bringing the 'Hoe again this year.
Okay, J/K. But I'm going to install a special alarm system to my tails!
So, my tails are IPCW.
Before tinting
After tinting
These are completely plug n play.BINGA said:Curious though, did you have to put your own load resistors in or were they already built in so pretty much plug n play?
CdnGMan said:Since I acquired a set of these LED taillights at the last meet we held,
[EBAY]220854762457[/EBAY]
I was wondering if anyone had done the quad tail mod for them...
If so, how complicated was it?
CdnGMan said:Since I acquired a set of these LED taillights at the last meet we held,
[EBAY]220854762457[/EBAY]
I was wondering if anyone had done the quad tail mod for them...
If so, how complicated was it?
Sparky said:You can't. The lower portion does not have the circuitry required to do 4 "dim" bulbs for running lights. Unless you're referring to quad brake/turn, then yeah, you can do that.
CdnGMan said:Ok, so the quad brake / turn is what I'm after then. Is it a "simple" job or is it more involving?
Thanks again!