Led Hyper flashing Easy fix without resistors

[NODAYSOFF]

Grab one of these lighting control modules....eliminates the hyper flashing from the leds without using resistors at each bulb. Located under the lower dash panel closest to pedals on the drivers side, should be attached right to the panel. Simple plug and play. Takes under 5min to complete. https://www.oreillyauto.com/detail/...10-terminal-turn-signal-flasher/lm486/4542991

 

[xavierny25]

Welcome to last year.

LED Brake lights and turn signals

Hey guys - I'm a bit frustrated with my LED upgrades I've done on my 06 Trailblazer. I've done this several times before on various vehicles, so I decided to do the same to my rig. Here's my issue... I installed the ballasts just like any other vehicle I've done them on and the driver's side...

gmtnation.com

Actually we've known about it for far longer then that.

 

[Blckshdw]

I have the predecessor to that one in my truck, still going strong. And no cruise control issues either after removing my LED tail assemblies and switching to bulbs in the stock housings. That was a pleasant surprise.