clicking actuator - like so may can i disable

jnich

Original poster
Member
Jul 8, 2012
2
is it possible to just disable the actuator while it is set to blow thru main vents so i don't have to hear the clicking - my ac guy wants 5.5 hours plus the part to replace it - thats like 600$ to do it myself i would need to start by step by step taking the dash out and i have not seen that despite my cruising the threads to exhaustion - meantime i am about to take my gun downstairs and blow a hole thru the dash - just had my blower and resistor module replace
2002 slt envoy
jnich
 

The_Roadie

Lifetime VIP Donor
Member
Nov 19, 2011
9,957
Portland, OR
Sure. Just yank the connector off the actuator and it will shut up. Check the manuals available on the site for how to remove the dash. This only took me a couple of hours to get it to this condition. I have the factory shop manuals, but I expect the one archived here has something similar. http://gmtnation.com/f23/need-service-manuals-get-them-here-371/

dash03.jpg
 

pejeeper

Member
Jan 27, 2012
81
That scares me. I would definitely end up with a few left-over screws/bolts and would end up driving it off a cliff from all the resulting rattles under the dash.
 

Forum Statistics

Threads
23,273
Posts
637,499
Members
18,472
Latest member
MissCrutcher

Members Online