This is a fairly long and comprehensive "Start to Finish" look at how the FATA Aluminum Company creates components that are manufactured using mostly Automated Processes and Robotic Machines to perform the "The Lost Foam" Process. This video perfectly shows the creation of some Aluminum 4 Cylinder DOHC Engine Heads and their matching All Aluminum Engine Blocks.
There are some very interesting views here... including how they employ the White Powdered Poly-Styrene Ball materials to create the "Plastic Powder Positive" Engine Head and Engine Block Blanks in sub-segments that are eventually Hot-Glued together.After that... they enjoy a bath in a Liquid Ceramic Emulsion coating (Tope-Gray) and drained out and Baked thoroughly to guarantee all of the Poly-Styrene surfaces are replicated and hold fast as the plastic gets vaporized on contact with the Liquid Aluminum Pours.
Afterwards, these Finished Blanks are submerged inside large, sturdy cylinders and filled or surrounded completely with the Special Casting Sand. "Shaker Tables" are used during the sand filling to vibrate the contents to ensure complete coverage of their Tope-Gray Ceramic Coated White Plastic "Positives". A Fresh Kettle of Molten Aluminum is dipped into and the right amount gets poured into a Sprue Funnel while the Liquid Aluminum displaces and vaporizes the Poly-Styrene Blanks completely away.
Once cooled down and stable... The cast Aluminum Heads and Engine Blocks are extracted from the sand containers... turned over and over to get out as much sand as possible and then washed in a liquid bath that shatters the Tope-Gray thin Ceramic Shell (...think M&Ms Peanuts here) and what is left are the Raw Aluminum Engine Heads and Blocks ready for minimal machining.
They do not show this part of the process in this video... but In the case of the GM LL8 4.2L Engines and its 5 Cylinder Sister... The Cast Iron Cylinders are Chilled down Icy Cold before being slipped into the Upper Block and once returning to ambient temperature...they remain steadfastly held tight against the sides of the Aluminum casting holes molded into the engine block.
The scenes involving their actual X-Ray Analysis of the components looking for cracks, metallic bubbles and defects in the very complex shapes first created in White Plastic and resolved perfectly as Aluminum Components bears proof at just how flexible this process can be in creating something amazing and durable made of 99% Recyclable Aluminum... out of almost nothing: