- Mar 31, 2012
- 32
I am working to decide on my 3rd set of wheels since I got my TB a few years ago. I am comfortable enough that I want to use some of the 1.5" wheel adapters this time as there seems to be less and less available to fit our bolt pattern. That said, I need some help from those smarter than myself on here.
I am looking at the 20" Helo HE835 with specs below:
Rim Diameter 20 inches
Rim Width 9 inches
Bolt Pattern (Number of Holes) 6
Bolt Pattern (Pitch Circle Diameter) 139.7 millimeters
Offset +18 millimeters
Backspace 5.71 inches
Bore Diameter 106.25 millimeters
My question is with the 1.5" adapters and these specs will I have any rubbing/other concerns with stock TB setup.
Also what would be the tire size I could run on these, again without rubbing or other issues. Any help is truly appreciated!
I am looking at the 20" Helo HE835 with specs below:
Rim Diameter 20 inches
Rim Width 9 inches
Bolt Pattern (Number of Holes) 6
Bolt Pattern (Pitch Circle Diameter) 139.7 millimeters
Offset +18 millimeters
Backspace 5.71 inches
Bore Diameter 106.25 millimeters
My question is with the 1.5" adapters and these specs will I have any rubbing/other concerns with stock TB setup.
Also what would be the tire size I could run on these, again without rubbing or other issues. Any help is truly appreciated!