Although this post is related to another that I made, it is a slightly different topic. If this is considered double posting, I apologize and please remove it. I recently bought air bags from
Arnott. The installation was really easy, but the new bags are not inflating. The compressor was still inflating the older air bags prior to taking them off. Everything was working fine, with the exception that the original bags were leaking. What could have happened? I didn't disconnect any plugs/connections. I did pull the fuse for the compressor/air ride suspension. The compressor IS working. I turned it on manually. After I started the Envoy, I let it run for several minutes and the compressor never kicked on. Is there a reset procedure? I do have all jack stands and jacks removed. Should I have left it elevated? Thanks again for any replies.
Arnott. The installation was really easy, but the new bags are not inflating. The compressor was still inflating the older air bags prior to taking them off. Everything was working fine, with the exception that the original bags were leaking. What could have happened? I didn't disconnect any plugs/connections. I did pull the fuse for the compressor/air ride suspension. The compressor IS working. I turned it on manually. After I started the Envoy, I let it run for several minutes and the compressor never kicked on. Is there a reset procedure? I do have all jack stands and jacks removed. Should I have left it elevated? Thanks again for any replies.