I am currently working on putting my valve body back together using a kit from Oregon Performance. The kit contains Sonnax and Transgo parts. 2008 Envoy 4l60e. 120k.
Using the Sonnax pinless accumulators for the 1-2 and the 3-4. My question is that I am 99% sure there is only one stubby spring used on the 1-2 side. Sonnax instructions say to use OE spring(s). They show 2 springs in the instructions. Transgo says to use 3 supplied Springs.
My question is can anyone confirm that I only had one spring on the 1-2 accumulator side ? Transmission shifted fine before I started.
Thanks in advance.
Clark
Using the Sonnax pinless accumulators for the 1-2 and the 3-4. My question is that I am 99% sure there is only one stubby spring used on the 1-2 side. Sonnax instructions say to use OE spring(s). They show 2 springs in the instructions. Transgo says to use 3 supplied Springs.
My question is can anyone confirm that I only had one spring on the 1-2 accumulator side ? Transmission shifted fine before I started.
Thanks in advance.
Clark