Need some scan tool/Torque readings

[CaptainXL]

I have what looks like some funny torque readings and i am trying to isolate. For those of you using a scan tool. Can you please help with verifying the following readings?

With koeo:

1. Throttle position = 15%
2. Wot = 85%

Engine running at idle:

1. Load 40%

 

[ksimm92]

I cant remember the exact readings, but I remember my load being a lot higher then I would have thought. 40% sounds in the same area mine was last time I checked.

I will hook my scanner up when I head to work tomorrow and make a not of what it says.

 

[jimmyjam]

thats how the TPS value reads. don't know if the ETC position pid is available in torque, or you could modify the pid equation

LS2: Throttle Position (SAE) % vs. ETC Position % - HP Tuners Bulletin Board

as far as load, i don't know what load refers to or how its calculated

 

[CaptainXL]

thats how the TPS value reads. don't know if the ETC position pid is available in torque, or you could modify the pid equation

LS2: Throttle Position (SAE) % vs. ETC Position % - HP Tuners Bulletin Board

as far as load, i don't know what load refers to or how its calculated

thanks Jim. Not sure about engine load as well but i just got done reading a post from someone who has an acadia and they see 50% engine load at idle.