- May 27, 2013
- 8
Posting for friend that has a '04 TB long wheelbase who discovered that the front dif has run dry, so the dif is on borrowed time. He is contemplating cutting the axle halves so they no longer are splined into the dif. The hub side of the axle halves will still be inplace as he feels that the hub bearings need to be preloaded as supplied by the large nut. The question is whether the drive shaft that's between the dif and transfer case can be disconnected effectively making the truck a 2(1) wheel drive?
Thanks for any response.
Thanks for any response.