- Aug 25, 2012
- 955
Hey guys. So I need your help since I am coming up with no results. I know there was a thread on here that gave the bulb part #'s for the little bulbs we have on the cluster, window switches, headlight switch, etc. I have my truck where it is slowly starting to get bulbs in the cluster and HVAC control to burn out. Right now, my passenger side front door light is out, all the lights in the headlight switch assembly are out, the light for my motor speed on the HVAC will go out until I hit the knob for it and it comes on, and tonight my light that illuminates the left portion of the speedometer is out until I banged on the top of my dash.
Does anyone know the part number for those bulbs so I can buy some? I saw a thread where may03 had some back in April for the cluster gauge and if he has them still that would be cool for me to buy off him. I do not care to do a LED conversion for them as I do not really care for it. It would be nice and all but in all honesty, I am too lazy to change the bulbs on everything to LED's.
Also, since my stepper motors are just fine, all i need to do is take a fork and pop off the needles, resolder the new bulbs in the cluster and push the needles back down onto the stepper motors right? And I was thinking to go from the stock red needles to the blue/chrome needles you would find in an escalade like this http://www.ebay.com/itm/BLUE-CHROME-SPEEDOMETER-GAUGE-CLUSTER-NEEDLE-SET-FOR-GM-PICK-UP-TRUCKS-SUVs/370593281968?_trksid=p2054897.c100204.m3164&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3Dd6c933bf9b1f4b05bc92fa0e15c3b467%26pid%3D100204%26prg%3D20140407115239%26rk%3D4%26rkt%3D30%26mehot%3Dpp%26sd%3D220917606162
If I were to go the LED conversion, I was thinking to put a large enough resistor in line with wire A7 or A5 on the cluster wire harness since from what I see on the schematic for it, are the 2 leads used for power and ground on the lights. Any confirmation on this?
Any help is certainly appreciated!!
Does anyone know the part number for those bulbs so I can buy some? I saw a thread where may03 had some back in April for the cluster gauge and if he has them still that would be cool for me to buy off him. I do not care to do a LED conversion for them as I do not really care for it. It would be nice and all but in all honesty, I am too lazy to change the bulbs on everything to LED's.
Also, since my stepper motors are just fine, all i need to do is take a fork and pop off the needles, resolder the new bulbs in the cluster and push the needles back down onto the stepper motors right? And I was thinking to go from the stock red needles to the blue/chrome needles you would find in an escalade like this http://www.ebay.com/itm/BLUE-CHROME-SPEEDOMETER-GAUGE-CLUSTER-NEEDLE-SET-FOR-GM-PICK-UP-TRUCKS-SUVs/370593281968?_trksid=p2054897.c100204.m3164&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3Dd6c933bf9b1f4b05bc92fa0e15c3b467%26pid%3D100204%26prg%3D20140407115239%26rk%3D4%26rkt%3D30%26mehot%3Dpp%26sd%3D220917606162
If I were to go the LED conversion, I was thinking to put a large enough resistor in line with wire A7 or A5 on the cluster wire harness since from what I see on the schematic for it, are the 2 leads used for power and ground on the lights. Any confirmation on this?
Any help is certainly appreciated!!