- Mar 31, 2014
- 40
Howdy Gents, migrating from Trailvoy. I have been chasing run probs with TB. Have cleaned throttlebody spotless (idles like a new truck now between stalls), replaced cam position sensor, variable valve timing solenoid, oil pressure sensor, crankshaft position sensor, and a seafoam treatment. Truck is at stealership for crank relearn tonight, but I noticed last week during seafoam treatment that the vacuum line between manifold and brake booster was missing clamp and not really tight at booster. Just read online that this causes stalling and surging on other makes and models. Could this really be causing my stalling while braking problem? Didn't think that hose could be super important based on the cheapo clamp the factory used. I have no prob with brakes, just infuriating stalling problem. Thoughts?