- Feb 1, 2015
- 95
OK Hello Guys i made a small video for you all on how to Correct or Change the Mileage of Your Trailblazer Using Digiprog 3 odometer programmer
Before i begin i am confirming that this topic & video is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars Mileage for Sales purposes Doing So is Considred a Fraud and is prohibited by law i have done this only because i had a problem with my mileage and i needed to correct it.
https://www.youtube.com/watch?v=61MznrvTdRw&feature=youtu.be
And here is some useful pictures for the same process
And here is the Final Result
Before
After
And here is some notes for doing this properly :-
Before i begin i am confirming that this topic & video is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars Mileage for Sales purposes Doing So is Considred a Fraud and is prohibited by law i have done this only because i had a problem with my mileage and i needed to correct it.
https://www.youtube.com/watch?v=61MznrvTdRw&feature=youtu.be
And here is some useful pictures for the same process
And here is the Final Result
Before
After
And here is some notes for doing this properly :-
- For US Users Please make Sure to Check the Voltage of your adapter before connecting to AC (use the one included with the unit as it's 110-220 V ) Just to make sure you don't fry your programer
- Also For US Users they Need to Change the Metric Unit from KM to MPG or Vise Versa From MPG to KM for European Users before reading or Writing on the Chip
- You will need to Use The ST 01/2 Cable for the Trailblazer see Here
- Very Very important to Connect the programer Clip as per the Pictures attached where the Red Color pin in the Clip is Up (See Picture No.6)
- Before assembling the cluster back together connect it to the car first and check the mileage reading before installing needles back and installing the whole cluster back to the car
- Also Very Very Very Important that you Always Save the Old chip data in the Programer for any thing goes wrong so you can write it back if needed or even if someone fried his chip and needed to install new chip it will be really easy to write it back
- if you needed any time to restart again or your programmer got stuck while working simply take out the Power plug and reinsert it again to restart the programmer ( Never ever unplug AC power Plug when programmer is reading or Writing on the EEPROM CHIP otherwise you will destroy it )