trailblazer memory savor

[Frankie Archuleta]

Hey guy I am new to this forum did lots of reading here great site!!! Anyways I am looking on info for a memory saver. I did a battery change and lost the door actuator what a pain!! LOL does anyone recommend what memory saver would be good to get? My family we own 3 trailblazers (04,05 and 07) and this would come in handy hate to go threw that mess again!! Thanks for any info

 

[Mooseman]

I have never found the little 9V ones to work well. As soon as you open a door, it's dead. Last time, I used a lithium booster pack when I changed the battery.

As far as the actuator is concerned, it would have died anyway. It's not just because the battery was disconnected.

 

[Wooluf1952]

Welcome

In case you haven't heard:
http://gmtnation.com...eres-the-story/

Totally agree with Mooseman. Except I use one of the older jump packs. Just make sure none of the battery cables short to ground while you're swapping batteries.

 

[Frankie Archuleta]

What do you connect the jumper to? My battery is side post

 

[Mooseman]

(-) to body ground and (+) to the battery cable side of the mega-fuse, which is the black cable, which is the one on the right in this picture.

 

[Frankie Archuleta]

This one that I put a red arrow? by the way thanks for your help!!!

 

[Mooseman]

That's the one

 

[Frankie Archuleta]

one last question do you know if this will work? sorry for all the questions just dont wanna screw something up lol I really appreciate your help!! https://www.amazon.com/dp/B01D42TYFC/?tag=gmtnation-20

 

[Mooseman]

That will definitely work and will also be useful if you ever need to jump start anything. These are more power than their size let you believe.