Ok to kind of make a long story short(er), my water pump went bad which in turn broke my sepentine belt...I ordered the US MOTOR WORKS (MCK1008) water pump and fan clutch kit. (Figuring it be better to change the fan clutch at the same time š¤·š¼āāļø)...From rock auto..got the new parts, changed them out and now I have P0526 code which before all this, their was no engine light on.. so I read many threads to try to figure this out, many seemed to say it was the harness outside of the radiator that connects to the fan clutch...changed that out with a new harness as the old looked in pretty bad shape....And I still have the code. If I clear the code with my scanner, I can drive fine no light or anything until I shut the car off and every time I restart it the second time, the light comes back with the same code...itās not overheating and itās driving nice and smooth...Iām at a lose of what to try next. How would I know if the new fan clutch was bad right out of the box? Should I send it back for replacement? Any suggestions or help is greatly appreciated!!!