- Nov 21, 2011
- 211
Doing some planning ahead on replacing the starter on my 95 S-10. The official shop manual indicates to loosen the engine and transmission mounts and raise the engine to get the starter out of a 4x4. None of the various online accounts I've read raised the engine. Some said to remove the flywheel dust shield, some disconnect the exhaust pipe, some removed a cross member. All said the clearances were tight. So my question is have any forum members experienced replacing the starter on a 4x4 S-10 4.3L engine? Model years 93, 94 and 95 were similar so I'd guess similar procedures.