So my truck is a 1995 k2500 silverado with a 5.7 350 tbi engine in it. So I just got done with a surging problem and a whole bunch of new parts dumped into this vehicle and it’s now running a lot better. There’s only a few problems left though. So what it’s been doing is, it’s sputtering when you floor it pedal all the way down to the floor and it will sputter. The second thing is it will loss power behind it and then lose speed till it completely stalls out and then once I get to a stop. The truck will have a slight problem starting back up I’ll give it a minute to sit then turn the key starts up, put it in drive the second you let off the brake stalls out immediately again. I have no idea what it could be everything on the intake manifold including the intake manifold is brand new except the tbi and the injectors and fuel pressure regulator, the fuel filter is new, the compression is fine the fuel pressure is fine the only other things going on is there is it has a tick to it and there is a very small drip at the transfer case but I don’t think the leak at the transfer case is the problem even though yes it is a problem, BUT I don’t believe that’s the issue at hand here.