What came in your mail today?

Boricua SS

Member
Nov 20, 2011
3,080
Ohio
Finally after almost a month of waiting, All my lights showed up amoungst other odds and ends...

Upgraded the HID's to LED's in the beaSSt, and upgraded my factory HID's in the daily with a higher temp (6000k) bulb. Got a Camaro SS emblem for my grille, and updated the switchbacks and fogs to match the new LED's...I received the last piece of the puzzle for the complete overhaul of a project that I'll post later about.



lights.jpg
 

Blckshdw

Moderator
Nov 20, 2011
10,681
Tampa Bay Area, FL
Bunch of goodies for my living room TV rewiring project.
  • 25' length of 2.5" flexible conduit (which is some BS, I thought it was gonna be 2.5" OD, but it's more like 2.75" ID :hissyfit:)
  • 50' single plug electrical extension cord
  • 50' SPDIF optical audio cord
  • 50' pair of HDMI cables
  • 5 pack of cable management grommets (that are going back since the OD fits inside the conduit completely :hahano: )

20200513_142323.jpg

Ordered the conduit from home depot (wasn't available in store), and it really seems like a little much for what I needed. Looked online again at smaller options and quickly realized why I went with this one, everything else costs WAY more than this does for whatever reason. 2" would have probably been best so connectors didn't get wedged anywhere, but as long as I get the right grommet to go into the ceiling, it really shouldn't get noticed once finished. 🤞

Still need to see if the bundled up speaker wires I have on the 3 speakers mounted to the TV are long enough to make the trip, or if I'll have to extend them.
 

Sparky

Member
Dec 4, 2011
12,927
Front crash sensor for the truck. Soon the idiot light will be bye bye.
 

xavierny25

Member
Mar 16, 2014
6,324
Staten Island, N.Y
Acdelco fuel pump which also came with some GM paper work.20200515_155308.jpg
I still have a little more then a quarter tank so I'll do some driving tonight to get it down some more before I get to installing it tomorrow morning.
 

Matt

Member
Dec 2, 2011
4,022
Acdelco fuel pump which also came with some GM paper work.View attachment 94572
I still have a little more then a quarter tank so I'll do some driving tonight to get it down some more before I get to installing it tomorrow morning.

Have fun with that, although I assume you're going to your brothers shop that has a lift. I did mine in my driveway and it was, um, fun...
 
  • Like
Reactions: Eric04 and Redbeard

xavierny25

Member
Mar 16, 2014
6,324
Staten Island, N.Y
Have fun with that, although I assume you're going to your brothers shop that has a lift. I did mine in my driveway and it was, um, fun...

Nope, no lift! Shops to packed to let me get in and do this repair. I'll be doing it in the back of the house laid on my back like a lot of folks have. Wish me luck.
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Look what the Fedex guy dropped off for the Caprice.
IMG_20200523_180527_resized8934242603405501248.jpg
 

Matt

Member
Dec 2, 2011
4,022
The rest of the metal tree rings for the front garden...can't wait until the much arrives on Tuesday. :whistle:
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
A roll stick on heat insulation and a roll of polyethylene webbing for the pool's solar cover.
 

Attachments

  • IMG_20200527_132224.jpg
    IMG_20200527_132224.jpg
    427.8 KB · Views: 3

Boricua SS

Member
Nov 20, 2011
3,080
Ohio
a usb/aux port cig lighter replacement. 10 years ago when they werent making these, i hollowed out one of the cig lighters and hid the USB from my pioneer head unit inside of it. amazing that they come in a simple plug and play add on now lol...
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Y E S !
 

Attachments

  • IMG_20200528_122503.jpg
    IMG_20200528_122503.jpg
    435.5 KB · Views: 8

northcreek

Member
Jan 15, 2012
3,318
WNY
Old welding table light had an unfortunate accident, got this new one for $20 shipped and it's really well built, I thought maybe chromed plastic but, it's aluminum billet, led, and no cord on bench now, think I'll get another one...:2thumbsup:100_1419.JPG100_1420.JPG100_1422.JPG
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Ordered these for the Caprice rear for the conversion to Brembo calipers. Ordered on RA on Wed evening, came today.

Trying these Ctek coated rotors for the first time as the ACDelco were quite spendy. They're as big as the front rotors on the TB! :eek:
 

Attachments

  • IMG_20200530_171557.jpg
    IMG_20200530_171557.jpg
    496 KB · Views: 1
  • IMG_20200530_171602.jpg
    IMG_20200530_171602.jpg
    409.5 KB · Views: 1

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Finally received my hair clipper attachments. Hair cut coming!

IMG_20200605_181704_resized5020039929459243483.jpg

Was supposed to arrived Wed next week. Very nice surprise! Old 50" TV is dying and this will just fit in its place.
IMG_20200605_181611_1_resized4872265227122392708.jpg
 

northcreek

Member
Jan 15, 2012
3,318
WNY
Tired of replacing household dehumidifiers from big box stores every few years so I bought this commercial duty unit. This keeps the basement shop and apartment from getting funky smelling when the humidity gets bad in the Summer...
Delivered to my door on pallet via semi truck
HGC701602-01_480x480.jpg
 
Last edited:

BrianF

Member
Jul 24, 2013
1,193
West central Sask.
Well my fuel pump for the Trailblazer came in from Amazon. I opened her up and saw pieces of white plastic floating around the bottom of the box. The white plastic housing was broke to piss, exposing the sock filter and a metal locking tab was bent. The shipping boxes were pristine so this occurred elsewhere.

My wife is sorting out the return now. Sucks but at least I am not in a bind to replace the damn thing.
 

Attachments

  • 20200614_084446.jpg
    20200614_084446.jpg
    196.3 KB · Views: 6
  • 20200614_084452.jpg
    20200614_084452.jpg
    265.2 KB · Views: 6
  • 20200614_084057.jpg
    20200614_084057.jpg
    477.6 KB · Views: 6

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Hey, at least it wasn't a transmission dropped off (literally) by Fedex!


And yes, that was our very own @Grimor
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Just got this. Saw these at the DIY garage but the smaller version. Nice, slim and rechargeable. And just $21 too.

Edit: Damn. Forgot the pic.
 

Attachments

  • IMG_20200617_101546.jpg
    IMG_20200617_101546.jpg
    637.1 KB · Views: 14
Last edited:

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Toys for the RV. Arrived while I was at the cottage.
 

Attachments

  • IMG_20200620_210416.jpg
    IMG_20200620_210416.jpg
    574.3 KB · Views: 9

xavierny25

Member
Mar 16, 2014
6,324
Staten Island, N.Y
20200624_182014.jpg
I busted mine a while ago, I did a half ass job getting it attached with a long ass screw but it didn't hold. The wife is tired of seeing it broken and dangling there so I decided it's time to replace it.
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Some.floor mats for the Caprice. Only took 2 months :crazy:
 

Attachments

  • IMG_20200716_100144.jpg
    IMG_20200716_100144.jpg
    654.9 KB · Views: 1

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Just came in the mail. Guess where this is going. :biggrin:
 

Attachments

  • IMG_20200716_130431.jpg
    IMG_20200716_130431.jpg
    381.7 KB · Views: 7

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Needed some plastic retainers so figured I'd just get a 200 piece variety at the same time as floor mat retainers, which I wound up not needing as they were built into the ones I received. Took 2 months on the boat over the Pacific. Also got the backup camera for the RV from Amazon.

IMG_20200717_134854_resized5243568526791175274.jpg
 

gmcman

Member
Dec 12, 2011
4,656
Last week when I had these braces removed, I noticed the support brace going diagonal not only had some surface rust, but I could hear the flakes inside. Unsure of how bad it was I figured I would look to get a spare.


Screenshot_20200723-154829_Gallery.jpg

Screenshot_20200723-154854_Gallery.jpg

So quick check, this brace, part# 15744732 has been discontinued but avail if the dealer does a search. Only about $20, not too bad for a GM piece of metal. So food for thought if anyone needs one. I'm sure they are also plentiful at the salvage yards.
 

Mooseman

Moderator
Dec 4, 2011
25,323
Ottawa, ON
Yesterday, a collapsible 12' ladder that can (barely) withstand my carcass' weight and a pair of RV step supports. One of them has a slight bend so I'll have to contact Amazon for either a replacement or a reduction as it's still usable.
 

Attachments

  • IMG_20200728_082701.jpg
    IMG_20200728_082701.jpg
    558.7 KB · Views: 6
  • IMG_20200728_082811.jpg
    IMG_20200728_082811.jpg
    674.6 KB · Views: 7

Forum Statistics

Threads
23,313
Posts
637,838
Members
18,518
Latest member
bobby2175