Firstly, sorry if posting in wrong area. I figured I would post a build thread and get some feedback. I have an 03 ls tb 4.2 with 168xxx. I started off with visual mods such as the underflow in the grill and windshield. Blue sparkle vinyl on the grill bowtie,debadging the rear, and some accent lighting on the inside. I added a 6.2" HD DVD head unit in dash and dual Sony xplod 10's. Next I did the quad high headlight mod and added some street sweeper lights in the front fender wells. I removed exhaust at the flange right around the front door(just in front of muffler) and 90d it out the pass side. The dump sits right under the b pillar and looks alright. It is just in the mock up stage right now and I will soon notch the frame so the tip sits tighter to the rockers. After that I am planning on adding a y and dumping in same spot on drivers side. After exhaust is done, my next project will be the passlock bypass mod so I can add a toggle switch ignition. For that I will be building an overhead console to house all the switches for ignition as well as for quads,street sweepers,interior and exterior accent lighting, as well as the light bar I will be flush mounting in the bumper when I get around to making it(can you tell I like lights yet?). I also am looking at getting an aux tranny cooler and CAI. Any recommendations on brand/series would be great. I was looking at b&m supercooled last night which is plate style an measures 11x7x1.5 with mounting bracket installed. Probably mount behind grill like everyone else. I will be posting pics/updates as I go but please be patient as it will be slow going.