So, there are only 2 torque specs > 150 lb ft on the truck--and both are LCA, right?

6716

Original poster
Member
Jul 24, 2012
821
And the lowest torque spec is 61 lb in?

So the range (LCA bracket mount bolts excepted) is about 5 to 150 lb ft.

Is there one decent torque wrench with this kind of range? Because as far as I can tell it looks like it will take 2 wrenches to cover all of that.
 

The_Roadie

Lifetime VIP Donor
Member
Nov 19, 2011
9,957
Portland, OR
2 is typical. One 3/8" drive, the other 1/2" drive.
 

MAY03LT

Member
Nov 18, 2011
3,412
Delmarva
At work I have both, but at home I've only needed a craftsman 1/2" that does 20-150ft/lbs. Anything under 20 and I tighten it by hand and make a click sound myself.
 

Lima Tango

Member
Dec 4, 2011
242
I got a Mountain 25-250 ft/lb 1/2" torque wrench from Amazon for a little over $50 and it has served me well lo these many months. I don't have an in/lb one yet but am getting around to it; in the interim I will totally have to rip it and click it like advised above.
 

Forum Statistics

Threads
23,272
Posts
637,478
Members
18,472
Latest member
MissCrutcher

Members Online