Secondary Air Pump Block Off Cover

[redmaro42]

Looking for the block off plate for the secondary air pump system that bolts above the exhaust manifold on the passenger side. I am going to delete my air system to eliminate any chance of failure down the road, use HPtuners to delete the codes, and clean up the engine bay appearance at the same time getting that valve out of there.

Anyone have a spare engine for parts that can remove the cover for me?

It's the piece in the black square below:

 

[24v 4.2]

http://www.lime-swap.com/products

 

[Mounce]

http://www.lime-swap.com/products

Purty cheap! And you'd be supporting a member here if you went with that one.

 

[Envoy_04]

Probably get it even cheaper at your local dealer, that's what I did and had under $15 in both parts needed. You'll need GM Part # 12574378, simply called "cover" and GM Part # 24577193, which is the gasket. FWIW, the GM part is identical to the cast piece Limequat is selling.

Here's a handy link, I have a post on page 2 which shows what needs removed to completely get rid of the system.

http://gmtnation.com/forums/topic/3457-removing-secondary-air-injection-system/page-2

 

[redmaro42]

already checked the dealer, it is a discontinued part, so no longer available.

 

[redmaro42]

thanks for the link to limeswaps!