Anyone ever seen this P0333 Code before? Popped up today and have no idea why? I cleared it and will see if it pops up again. something with Knock sensor bank 2 voltage high?
P0333 code? what gives?
- Thread starter coolasice
- Start date
IllogicTC
Member
- Dec 30, 2013
- 3,452
I would expect, if the problem were with the feed voltage, that codes would be present for both sensors and maybe other things run off the same regulator internal to the PCM. That said, it may be possible that the knock sensor is shorting internally or that the wires feeding the sensor have rubbed spots where they're bare and making contact with one another.
I'll see if it comes back, it was raining when it happened, guess if it comes back I'll have to do some testing.
