I just was out at my truck and I noticed a 1 sq foot oil spot on the ground. Popped the hood and I see a droplet of oil dripping out of the end of the oil pressure sending unit about every 3 seconds. The green clip is broken at the part where it secures around the stub on the end of the sending unit. When I pulled the wiring harness out of it, it leaked even faster, barely staying in as it is. I checked my oil and it's half a quart low. Looks like a pretty fast leak. I'm gonna try and crossover two zip-ties as a band-aid, that's the most I can do right now. I don't want the connector falling out.
Edit: I looked up the connector, looks like you have no choice, but to cut the wires and put in crimp or solder in a new one. No parts stores carry this, so gonna have to next-day ship with RockAuto.
https://www.rockauto.com/en/moreinfo.php?pk=3478179&cc=1424281&jsn=10798
Edit: I looked up the connector, looks like you have no choice, but to cut the wires and put in crimp or solder in a new one. No parts stores carry this, so gonna have to next-day ship with RockAuto.
https://www.rockauto.com/en/moreinfo.php?pk=3478179&cc=1424281&jsn=10798
Last edited: